05 Attachment 1 - First Amendment to Agreement for Services - CTSConstruction Testing Services - First Amendment
Page 1 of 2
FIRST AMENDMENT TO AGREEMENT FOR CONSULTANT SERVICES
This FIRST AMENDMENT TO AGREEMENT is dated for identification this 19th day of May 2020 and
amends that certain agreement for Agreement for Services dated April 24, 2020, made by and between
the Town of Los Gatos, ("Town") and Construction Testing Services (“Consultant”).
RECITALS
A.Town and Consultant entered into an Agreement for Consultant Services on April 24, 2020,
(“Agreement”), a copy of which is attached hereto and incorporated by reference as Exhibit A to
this Amendment.
B.Town desires to amend the Agreement for Consultant Services to increase compensation for the
Scope of Services.
AMENDMENT
2.1 Scope of Services is amended to add the following:
Consultant shall provide services as described in that certain Proposal sent to the Town on
(DATE), which is hereby incorporated by reference and attached as Exhibit C.
2.6 Compensation is amended to add the following:
Compensation for Consultant’s professional services shall not increase in an amount of $46,532,
for a total agreement amount not to exceed $94,000 for Project #411-811-9901, inclusive of all
costs. Payment shall be based upon Town approval of each task.
All other terms and conditions of the Agreement remain in full force and effect.
ATTACHMENT 1
Construction Testing Services - First Amendment
Page 2 of 2
IN WITNESS WHEREOF, the Town and Consultant have executed this Amendment.
Town of Los Gatos Consultant by:
By: _______________________________ ___________________________
Laurel Prevetti, Town Manager
_____________________________
Department Approval: Name/Title
_______________________________________
Matt Morley
Director of Parks and Public Works
Approved as to Form: Attest:
s Gatos, California
______________________________ _________ ______________________________
Robert Schultz, Town Attorney Shelley Neis, MMC, CPMC, Town Clerk
PRELIMINARY ESTIMATE: INSPECTIONS & TESTING
01/31/20 Revised 2.21.2020P17375
TOWN OF LOS GATOSANNUAL STREET REPAIR AND RESURFACING ASPHALT OVERLAY
LOS GATOS, CA
ITEM:I ESTIMATED ESTIMATED UNIT ESTIMATEDONSITE TESTING & INSPECTIONS DAYS HOURS PRICE TOTAL
GEOTECHNICAL SERVICES
AB PLACEMENT 5 4 $85 $1,700AC PAVING 5 4 $85 $1,700102$85 $1,700
10 82 $0.58 $476
Preliminary Sub-Total of Onsite Testing & Inspection (approx.)$5,576
ITEM:II ESTIMATED UNIT ESTIMATED
LABORATORY TESTING & ENGINEERING UNITS/HOURS PRICE TOTAL
EARTHWORK/GEOTECHNICAL TESTING
COMPACTION CURVES (ASTM D 1557)2 $250 $500
R VALUE 2 $300 $600
SAND EQUIVALENT 2 $175 $350
SIEVE ANALYSIS 2 $125 $250
DURABILITY 2 $250 $500
HOT MIX ASPHALT TESTING
LTMD 5 $500 $2,500
SAMPLE PICK-UPS 15 $10 $150
STAFF ENGINEER 3 $125 $375
PROJECT MANAGEMENT 1 $140 $140
FINAL LETTER 1 $275 $275
Preliminary Subtotal of Laboratory Testing & Engineering (approx.)$5,640
Preliminary Estimated Fees $11,216Project Administration 6%$673
Total Preliminary Estimated Fees $11,889
If work is performed at night a 12.5% differential will be charged.
A 6% project administration fee will be charged monthly per invoice.
No contingency is budgeted by CTS for uncontrollable overtime, union or prevailing wage increases and unforeseen requirements that may arise in the
specifications, as well as for work over the estimated hours. Owner should budget appropriate amount for budgetary purposes.
The liability of Construction Testing Services (CTS) is limited to CTS's contract value. See attached fee schedule for basis of charges.
Estimate includes portal to portal travel time for nuclear gauge transport from laboratory per requirements of the CA Radiological Health Branch.
Estimate revised based on email from Suyesh Shrestha, Town of Los Gatos, dated 2/4/2020, 2/6/2020 and 2/19/2020.
Estimate based on plans by NCE, dated 11/18/2019. No construction schedule was available at the time this estimate was prepared. See attached fee schedule for basis of charges.
PORTAL TO PORTAL TRAVEL TIME FOR NUCLEAR GAUGE USE
PORTAL TO PORTAL MILEAGE FOR NUCLEAR GAUGE USE
DATE:PROPOSAL No.:
CLIENT: PROJECT:
LOCATION:
EXHIBIT C
Standard Discounted
* FIELD INSPECTION AND LABORATORY SERVICE Rate/Hour Rate/Hour
Steel $195.00 $82.00
Nondestructive - UT, MT, PT $200.00 $85.00
Steel Visual/UT Combination $200.00 $82.00
Concrete ACI $195.00 $82.00
Concrete ICC $195.00 $82.00
Masonry $195.00 $82.00
Fireproofing $195.00 $82.00
Soil Technician w/Nuclear Gauge and/or Sand Cone (portal-to-portal)$195.00 $85.00
Roofing & Waterproofing $195.00
Multi-Disciplined Inspector $195.00
Inspector Requiring G1 Pay Grade $225.00
Specialty Inspector or Where Formal Certification is Required $195.00
Field Inspector with Special Enhancement $195.00
Laboratory Technician $195.00
Technician Typist $195.00
**PROFESSIONAL ENGINEERING SERVICES
Principal Engineer (Civil/Structural)$320.00
Geotechnical Engineer $270.00 $170.00
Consulting Engineer (Civil/Structural)$245.00 $160.00
Associate Engineer, Licensed $220.00 $150.00
Project Manager $195.00 $140.00
Staff Engineer $195.00 $125.00
Field Supervision $170.00 $125.00
ASNT Level III $185.00 $130.00
Drafting $135.00
Quality Control Manager QOR
SPECIAL SERVICES
Portable and Mobile Laboratories, NDT and Soils QOR
* Epoxy Bolt/Expansion Anchor - Installation Observation $195.00 $80.00
*Epoxy Bolt/Expansion Anchor Proof Load Testing (portal-to-portal)$195.00 $80.00
*Coring, 1 Person (including equipment) (portal-to-portal)$180.00
*Coring, 2 Persons (including equipment) (portal-to-portal)$230.00
Project Research QOR
Ultrasonic Testing for Non-Metallic Materials QOR
Pavement Rehabilitation Analysis Using Deflections QOR
Roof Moisture Survey QOR
Soil Drilling Equipment QOR
Geotechnical Site Investigations/Foundation Reports QOR
Pachometer, Schmidt Hammer, Windsor Probe (portal-to-portal)$260.00
Floor Flatness Testing FF/FL - Equipment Fee $110/Day (portal-to-portal)$260.00
Measuring Moisture Vapor Emission Rate (Calcium Chloride) - $50/Kit (portal-to-portal)ASTM F1869 $260.00
Relative Humidity Testing - $70/Kit (portal-to-portal)ASTM F2170 $260.00
Ferroscan - Equipment Fee $110/day (portal-to-portal)$260.00
GPR - Equipment Fee $110/day (portal-to-portal)$305.00
Administration, Secretarial, Special Projects, Notary, Certified Payroll $145.00
Concrete/Grout/Mortar Mix Design Review (less than 48 hours notice - $500) $310.00 $250.00
Welding Procedure Review (less than 48 hours notice - $500)$310.00 $250.00
Welder Qualification Test $210.00
DSA Interim Reports $160.00
Geotechnical Pad Letter (less than 48 hours notice - $500)$310.00
Final Letter (less than 48 hours notice - $500)$310.00 $275.00
EXPERT WITNESS TESTIMONY
Court appearance, per day $2,000.00
Court appearance, per half day $1,000.00
2017 FEE SCHEDULE - P12613 4/28/17
PERSONNEL FEES AND BASIS OF CHARGES
INSPECTIONS, ENGINEERING & SPECIAL SERVICES
* Field inspection services will be billed in accordance with minimums shown on Basis of Charges.
**Professional engineering services and laboratory technician services will be billed at actual time.
INSPECTINGTESTING
ENGINEERING
All fees subject to Basis of Charges
INSPECTINGTESTING
ENGINEERING
GENERAL
MINIMUM HOURLY CHARGES – INSPECTION
Technician personnel and the following minimum charges are contractual commitment:
One-half day or less 4 Hours
Over one-half day 8 Hours
Show-up time (less than 2 hours notice = 4 hour charge) 2 Hours
WORKING HOURS AND PREMIUM TIME
Regular workday is the first 8 hours between 6:00 am and 6:00 pm Monday through Friday. Premium time is as follows:
Overtime, Weekdays and Saturdays (first 8 hours) 1.5 x quoted hourly rate
Overtime Saturdays (over 8 hours) and Sundays (first 8 hours) 2 x quoted hourly rate
Overtime Sundays (over 8 hours) and Holidays 3 x quoted hourly rate
Shift differential, swing and graveyard -
(Work performed between 2:00 pm and 4:00 am) 12.5%/hour additional to base or quoted rate.
MISCELLANEOUS CHARGES - Only Where Applicable
Notary Services Fee $27.50/each
Facsimile Charges. Plus $1.00/page (n/c for cover page) $5.50 minimum
Wireless Router/Data Card for Jobsite Internet $110.00/day
Parking Fees At Cost
Air Travel Cost Plus 5%
Outside Services Cost Plus 20%
Subsistence (per union contract) $120.00/day
Mileage Standard Federal Rate
Sample Pickup $20.00/each $10.00/each
Weekend Sample Pickup $85.00/hour
Project Administration 6% of Monthly Invoice
Samples Made by Others: Concrete Cylinders $110 + Test
Samples Made by Others: All Other Tests $45 + Test
Laboratory Sample Witness Fee $110.00
EZ Cure Boxes (Thermostatically Controlled Curing Boxes) QOR
Returned Check Fee $110.00
TESTS
INSURANCE
PAYMENT
BASIS OF CHARGES
Fees for tests and inspection include cost of technician, normal equipment and regular reports. Engineering services will be charged at applicable rates and will
require travel and mileage charges for equipment transport and storage per code (portal to portal) from the nearest CTS laboratory. Soils testing with nuclear
gauge and/or sand cone equipment and inspections requiring equipment will require applicable travel and mileage charges for equipment transport and storage
per code (portal-to-portal) from the nearest CTS laboratory. Fees for special projects, services overseas, or elsewhere in the United States, will be quoted on
request. With prior notification to Client; charges are subject to change at any time. Construction Testing Services reserves the right to adjust the rates quoted
in this contract based upon any Union or prevailing wage increases and/or changes in any industry requirements.
Testing fees shown include normal time for performing test. Samples requiring special preparation will be charged at the laboratory technician rate. Fees for
tests not listed will be quoted upon request. There will be a minimum charge of $100.00 for any engineering report. Please note some tests maybe tested by
subconsultants. Samples delivered to the laboratory after 3:00pm or samples needing results within 24 hours will incur a 50% mark-up.
For the waiver of subrogation if required by client, a 2% CTS administrative fee will be added to all gross billings/revenue in addition to the 3% fee from State
Fund. The liability of Construction Testing Services (CTS) is limited to CTS's contract value.
Invoices will be submitted monthly or bimonthly for services performed during the preceding month and are payable on receipt. Interest of 1.5% per month (but
not exceeding the maximum rate allowable by law) will be payable on any amounts not paid within 30 days, payment thereafter to be applied first to accrued
interest and then to the principle unpaid amount. Attorney’s fees or other costs incurred in collecting any delinquent amount shall be paid by client. Visa,
MasterCard and American Express payments are accepted however fees will apply. Visa and MasterCard payments require an additional 3% on top of the
amount of the invoice being paid. American Express payments require an additional 4% on top of the amount of the invoice being paid.
All fees subject to Basis of Charges
INSPECTINGTESTING
ENGINEERING
Standard Discounted
CONCRETE Rate/Each Rate/Each
Compressive Strength of Cylindrical Concrete Specimens (6x12) ASTM C39 $66.00 $45.00
Compressive Strength of Cylindrical Concrete Specimens (4x8) ASTM C39 $66.00 $45.00
Compressive Strength of Cylindrical Concrete Specimens (Over 8000 PSI)ASTM C39 $117.00
Cylinder molds. 6” x 12” and 4" x 8" ASTM C470 $55.00
Compressive Strength of Lightweight Insulating Concrete ASTM C495 $77.00
Obtaining and Testing Sawed Beams and Drilled Cores of Concrete (Cores) ASTM C42 $99.00
Flexural Toughness of Fiber Reinforced Concrete (Round Panel) ASTM C1550 $363.00
Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) ASTM C78 $253.00
Flex Beams per Caltrans Test Methods CT523 and CT524 $253.00
Length Change of Hardened Hydraulic-Cement Mortar and Concrete (Shrinkage, 1 Sample) ASTM C157 $121.00
Shotcrete Nozzleman Qualification Letter (Per Nozzleman, Per Position) ACI 506, ASTM C42 and C1140 $363.00
Shotcrete Pre-Qualification Cores (Compression and Visual) ACI 506, ASTM C42 and C1140 $88.00
Shotcrete Production Cores ASTM C1140 $88.00
Coefficient of Thermal Expansion AASHTO T336 $440.00
Determining Density of Structural Lightweight Concrete (Cylinders) ASTM C567 $330.00
Standard Specification for Concrete Made by Volumetric Batching and Mixing ASTM C685 $798.00
Cement Quality Sampling CBC 2010 $550.00
Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete ASTM C472 $44.00
Splitting Tensile Strength of Cylindrical Concrete Specimens ASTM C496 $209.00
Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression ASTM C469 $177.00
Grab Sample, Sealing and Storing in a Humidity and Temperature Controlled Room CBC $121.00
Density of Hydraulic Cement ASTM C188 $160.00
Testing of Controlled Low Strength Material (CLSM) Test Cylinders ASTM D4832 $121.00
GFRC Pull Test PCI $308.00
GFRC Flexural Test PCI $308.00
Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam (Cell-Crete) ASTM C796 $423.00
MASONRY
Compressive Testing of Grout (Masonry) ASTM C1019 $99.00 $60.00
Compressive Strength of Hydraulic Cement Mortars Using 2" Cube Specimens ASTM C109 $99.00 $60.00
Compressive Strength of Masonry Prisms ASTM C1314 $149.00 $100.00
Testing Concrete Masonry Units and Related Units (Core Compression) CBC 2105A.4 $149.00
Compressive Strength of Molded Masonry Mortar Cylinders and Cubes (2" Sample) ASTM C780 A7.6 $99.00 $60.00
Testing Concrete Masonry Units (CMU) and Related Units (Full Unit) ASTM C140 $149.00
Linear Drying Shrinkage of Concrete Masonry Units (Per Unit) ASTM C426 $220.00
Masonry Core Shear Testing CBC 2105A.4 $220.00
Testing Concrete Masonry Units (Absorption, Moisture Content, Unit Weight) ASTM C140 $275.00
Brick and Clay Tile (modulus of rupture, compression, saturation coefficient, suction rate,
efflorescence)*ASTM C67 $825.00
Mortar Molds. 2” x 4”. Single Use $99.00
Mortar or Grout, Stored and Cured, Not Tested (Including Mold)$99.00
AGGREGATES (SOILS AND CONCRETE)
Determining Sieve Analysis of Fine and Coarse Aggregates (Coarse Only) CT202/ASTM C136 $182.00 $125.00
Sieve Analysis of Fine and Coarse Aggregates (Fine Only) CT202/ASTM C136 $242.00 $200.00
Sieve Analysis of Fine and Coarse Aggregates (Wash Included) CT202/ASTM C117 $303.00 $225.00
Sieve Analysis of Fine and Coarse Aggregates (200 Wash Only) ASTM C117 $182.00 $125.00
Evaluating Cleanness of Coarse Aggregate CT227 $303.00
Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate ASTM C88/CT214 $220.00
Unit Weight of Aggregate CT212 $149.00
Clay Lumps and Friable Particles in Aggregates ASTM C142 $175.00
Flat Particles, Elongated Particles or Flat and Elongated Particles in Coarse Aggregate ASTM D4791/CT235 $303.00 $225.00
Organic Impurities in Fine Aggregates for Concrete CT213/ASTM C40 $275.00 $200.00
Density, Relative Density(Specific Gravity), and Absorption of Coarse Aggregate ASTM C127/CT206 $275.00 $225.00
Density, Relative Density(Specific Gravity), and Absorption of Fine Aggregate ASTM C128/CT207 $275.00 $325.00
Resistance to Degradation of Small Size Coarse Aggregate by Abrasion and Impact in the Los
Angeles Machine ASTM C131(535) and C211 $440.00 $300.00
Percentage of Crushed Particles/Standard Test Method for Determining the Percentage of Fractured
Particles in Coarse Aggregate ASTM D5821/CT205
$330.00 $250.00
Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture,
and Grading) ASTM C1252/AASHTO T304A $330.00
Sand Equivalent Value of Soils and Fine Aggregate ASTM D2419/CT217 $220.00 $175.00
Durability Index (Fine)ASTM D3744/CT229 $330.00 $250.00
Durability Index (Coarse)ASTM D3744/CT229 $330.00 $250.00
Durability Index (Fine and Coarse) ASTM D 3744/CT229 $347.00 $275.00
Lightweight Particles in Aggregate ASTM C123/AASHTO T113 QOR
Resistance of Rock to Wetting and Drying CRD-C169 $484.00
*Unusual sample preparation for brick specimen will be charged at the established hourly rate.
CONCRETE AND MASONRY TESTS
All fees subject to Basis of Charges
INSPECTINGTESTING
ENGINEERING
Standard Discounted
SOILS Rate/Each Rate/Each
Direct Shear Test of Soils Under Consolidated Drained Conditions ASTM D3080 $440.00
Caltrans Corrosivity Package $413.00
Determining Field and Laboratory Resistivity and pH Measurements for Soil and Water CT643 QOR
Soils and Waters for Sulfate Content CT417 QOR
Soils and Waters for Chloride Content CT422 QOR
Particle-Size Analysis of Soils (with Hydrometer) ASTM D422 $484.00 $300.00
Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer ASTM D4542
$512.00
Standard Test Method for Particle-Size Analysis of Soils (without Hydrometer) ASTM D422 $440.00 $300.00
Liquid Limit, Plastic Limit, and Plasticity Index of Soils ASTM D4318/CT204 $440.00 $225.00
Laboratory Compaction Characteristics of Soil Using Modified/Standard Effort ASTM D1557/D698 $413.00 $250.00
Hydrometer Only ASTM D422 $440.00
pH of Soils ASTM D4972 $385.00
Relative Compaction of Untreated and Treated Soils and Aggregates CT216 $484.00
Determining the Resistance "R" Value of Treated and Untreated Bases, Subbases, and Basement
Soils by the Stabiliometer ASTM D2844/CT301 $484.00 $300.00
Laboratory Determination of Water(*moisture) Content of Soil and Rock by Mass ASTM D2216/CT226 $121.00 $75.00
Density of Soil in Place by the Drive-Cylinder Method D2937 $94.00
Expansion Index of Soils ASTM D4829 $330.00
Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
(Permeability)ASTM D5084/CT220 $451.00
Lab Compaction Characteristics of Soil 1 Point Proctor (Check Point) ASTM D698/D1557 $275.00
Maximum Index Density and Unit Weight of Soils Using a Vibratory Table ASTM D4253 $231.00
Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density ASTM D4254 $231.00
Density of Hydraulic Cement ASTM C188 $209.00
Volatile Organic Content EPA 8260B QOR
Semi Volatile Organics by GC/Ms (Basic Target List) EPA 8270C QOR
Total Organic Carbon ASTM 2974/EPA 5310Bm QOR
ICP Metals Concentration EPA 6020 - CAM/CCR 17 QOR
Total Extractable Petroleum Hydrocarbons: TPH, MTBE, Benzene,Toluene, Ethylbenzene, Zylenes,
%SS EPA 8015B QOR
ICP Metals Concentration EPA 6020 QOR
pH EPA 9045D $440.00
Sequential Batch Extraction of Waste with Acidic Extraction Fluid ASTM D5284 QOR
Chromium Soluble EPA 7196A QOR
Moisture, Ash and Organic Matter of Peat and Other Organic Soils (Organic Content) ASTM D2974 $220.00
Universal Soil Classification System (USCS) Test ASTM D2487 $242.00
California Bearing Ratio Test ASTM D1883 $303.00
Unconfined Compressive Strength of Cohesive Soil ASTM D2166/CT221 $154.00
ASPHALT
Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (Solvent) ASTM D2172/CT310 $605.00
Determining Low Temperature Performance Grade (PG) of Asphalt Binders ASTM 6816 QOR
Thickness/Height of Compacted Bituminous Paving Mixture Specimens (Cores) ASTM D3549/CT308 $220.00 $50.00
Method of Prep of Bituminous Mixture Test Specimens ASTM D6926/CT304 $220.00
Bulk Specific Gravity and Density of Compacted Bituminous Mixtures (LTMD) ASTM D1188 and D2726/CT308 $825.00 $500.00
Indirect Tensile (IDT) Strength of Bituminous Mixtures (TSR) ASTM D6931/CT371 QOR
Mechanical Size Analysis (Coarse and Fine) of Extracted Aggregate ASTM D5444/CT202 $330.00
Marshall Stability and Flow of Bituminous Mixtures ASTM D6927 $825.00
Theoretical Maximum Specific Gravity and Density (Rice) ASTM D2041/CT309 $330.00 $250.00
Measuring the Permeability of Bituminous Pavements and Seal Coats CT341 QOR
Swell of Bituminous Mixtures CT305 $303.00
Moisture Vapor Susceptibility of Bituminous Mixtures/Moisture or Volatile Distillates in Asphalt ASTM D1461/CT307
$770.00
Stabilometer Value (1 sample) CT366 $303.00 $225.00
Determination of Asphalt Content of Bituminous Paving Mixtures by the Ignition Method CT382/ASTM D6307 $330.00 $250.00
Determination of Correction Factor of Bituminous Paving Mixtures by the Ignition Method CT382/ASTM D6307 $330.00 $250.00
Determination of Asphalt and Moisture Contents of Bituminous Mixtures by Microwave Oven CT370 $330.00 $250.00
Effect of Water on Compressive Strength of Compacted Bituminous Mixtures (Set of 6)ASTM D1075 $2,750.00
Compressive Strength of Bituminous Mixtures ASTM D1074 $220.00
SOILS, AGGREGATE, ASPHALTIC CONCRETE SERVICES & TESTS
* Unusual sample preparation (dried clays, saturated clays, etc.) and all other tests for treated or untreated soils, aggregate subbase and aggregate base will be charged at
established rates for laboratory technician.
** Does not include sample preparation or sieve analysis
All fees subject to Basis of Charges
INSPECTINGTESTING
ENGINEERING
Standard
MATERIALS MECHANICAL TESTS Rate/Each
Mechanical Testing of Steel Products (General Tensile) ASTM A370 $385.00
Fillet Weld Break Test for Qualification (Welding) AWS B4.0 $165.00
Tension Testing of Metallic Materials, Tension Testing Wrought and Cast Aluminum and Magnesium-
Alloy Products, (Welding Coupon Tensile) ASTM E8, B557 and AWS B4.0
$385.00
Mechanical Testing of Steel Products (Couplers) ASTM A370 $375.00
Impact Testing of Miniaturized Charpy V-Notch Specimens, Notched Bar Impact Testing of Metallic
Materials ASTM E2248 and ASTM E23 QOR
Testing, Practices, and Terminology for Chemical Analysis of Steel Products ASTM A751 $275.00
Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #3-#8 ASTM A370 and E290 $303.00
Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #9-#11 ASTM A370 and E290 $363.00
Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #14+ ASTM A370 and E290 QOR
Mechanical Testing of Steel Products, Standard Specification for Steel Wire, Plain, for Concrete
Reinforcement ASTM A370, A82 and A185 $363.00
Guided Bend Test for Ductility of Welds, Mechanical Testing of Welds ASTM E190 and AWS B4.0 $220.00
Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Anchor
Bolts Only (Tension and Yield) ASTM F307, F1554 and F606
$435.00
Rockwell Hardness of Metallic Materials ASTM E18 $121.00
Proof Test for Carbon and Alloy Steel (Nuts Only) ASTM A194 or A563 $275.00
Radiographic Examination of Metallic Castings/Weldments ASTM E94, E1030 and E1032 QOR
Macroetching Metals and Alloys ASTM E340, E381 and AWS $275.00
Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers,
Direct Tension Indicators, and Rivets (HSB Assemblies) ASTM F606
$303.00
Mechanical Testing of Steel Products (Terminators Tensile) ASTM A370 $303.00
Strength for Sewn or Bonded Seams of Geotextiles ASTM D4884 $275.00
Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure ASTM D2261 $275.00
Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM D5034 $220.00
Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars ASTM D3039 $825.00
Steel Strand, Uncoated Seven-Wire for Prestressed Concrete ASTM A416 and A1061 $1,210.00
FIREPROOFING
Thickness and Density of Sprayed Fire-Resistive Material (SFRM) ASTM E605 $220.00
Cohesion/Adhesion of Sprayed Fire-Resistive Materials (Test Kit Only) ASTM E736 $62.00
CONTACT INFORMATION
Headquarters: 2118 Rheem Drive • Pleasanton, CA 94588 • P 925.462.5151 • F 925.462.5183
Peninsula: One Embarcadero Center, Suite 535 • San Francisco, CA 94111 • P 415.334.4747 • F 415.438.2357
Oakland: 246 30th Street, Suite 101 • Oakland, CA 94601 • P 510.444.4747 • F 510.835.1825
Stockton: 343 East Main Street, #711 • Stockton, CA 95202 • P 209.507.7555 • F 209.507.7554
Sacramento: 4770 Duckhorn Drive • Sacramento, CA 95834 • P 916.419.4747 • F 916.419.4774
Las Vegas: 3842 E. Post Road • Las Vegas, NV 89120 • P 702.257.4747 • F 702.257.4718
San Jose: 2033 Gateway Place, #500 • San Jose, CA 95110 • P 408.573.6992 • F 408.437.1201
All fees subject to Basis of Charges
PRELIMINARY ESTIMATE: INSPECTIONS & TESTING
01/31/20 Revised 2.25.2020P17376TOWN OF LOS GATOSANNUAL STREET REPAIR AND RESURFACING SLURRY SEAL RUBBER CAPE SEAL - SUPPLEMENT 1LOS GATOS, CA
ITEM:I ESTIMATED ESTIMATED UNIT ESTIMATEDONSITE TESTING & INSPECTIONS DAYS HOURS PRICE TOTAL
GEOTECHNICAL SERVICESASPHALT DIGOUT AND LEVELING COURSE MATERIALS 3 8 $85 $2,040DISTRIBUTOR SPRAY RATE (CHIP SEAL)3 8 $85 $2,040LIQUID RUBBERIZED ASPHALT TESTING SUITE (CHIP SEAL)3 8 $85 $2,040CHIP SEAL AGG TESTING SUITE (UNCOATED)3 8 $85 $2,040
SLURRY SEAL EMULSION TESTING SUITE 3 8 $85 $2,040SLURRY SEAL AGG TESTING SUITE 3 8 $85 $2,040182$85 $3,0601882$0.58 $856
Preliminary Sub-Total of Onsite Testing & Inspection (approx.)$16,156
ITEM:II ESTIMATED UNIT ESTIMATEDLABORATORY TESTING & ENGINEERING UNITS/HOURS PRICE TOTAL
HOT MIX ASPHALT TESTING
LTMD 3 $500 $1,500
AC CRACK SEALING
SOFTENING POINT 3 $120 $360
CONE PENETRATION @77 DEG 3 $90 $270
RESILIENCE @77 DEG 3 $150 $450
FLOW 3 $150 $450
AC MODIFIER
VISCOSITY 3 $108 $324
FLASH POINT 3 $125 $375
MOLEC. ANALYSIS 3 $150 $450
AC MODIFIER
VISCOSITY 3 $132 $396
FLASH POINT 3 $125 $375
MOLEC. ANALYSIS 3 $150 $450
CRM
ACETONE EXTRACT 3 $162 $486
RUBBER HYDROCARBON 3 $162 $486
NATURAL RUBBER CONTENT 3 $162 $486
CARBON BLACK CONTENT 3 $162 $486
ASH CONTENT 3 $162 $486
SIEVE ANALYSIS 3 $125 $375
BLENDED ASPHALT RUBBER BINDER
CONE PENETRATION @25 DEG 3 $90 $270
RESILIENCE @25 DEG C, PERCENT REBOUND 3 $150 $450
FIELD SOFTENING POINT 3 $120 $360
VISCOSITY @190 DEG C 3 $132 $396
SCREENINGS
SIEVE ANALYSIS 3 $125 $375
FILM STRIPPING 3 $125 $375
CLEANNESS VALUE 3 $125 $375
DURABILITY 3 $125 $375
ASPHALTIC EMULSION
TESTS OF EMULSION
VISCOSITY SSF, @77 DEG F 3 $132 $396
SIEVE TEST, % AASHTO T539 3 $125 $375
STORAGE STABILITY TEST, 1 DAY %3 $150 $450
RESIDUE BY EVAPORATION, %3 $162 $486
PARTICLE CHARGE 3 $150 $450
DURABILITY 3 $250 $750
TESTS OF RESIDUE
PENETRATION, 77 DEG 3 $90 $270
DUCTILITY 3 $125 $375
POLYMERE CONTENT, %3 $125 $375
TORSIONAL RECOVERY, %3 $125 $375
SAMPLE PICK-UPS 105 $10 $1,050
STAFF ENGINEER 3 $125 $375
Preliminary Subtotal of Laboratory Testing & Engineering (approx.)$16,908
Preliminary Estimated Fees $33,064Project Administration 6%$1,984Total Preliminary Estimated Fees $35,048
If work is performed at night a 12.5% differential will be charged.
A 6% project administration fee will be charged monthly per invoice.
No contingency is budgeted by CTS for uncontrollable overtime, union or prevailing wage increases and unforeseen requirements that may arise in the
specifications, as well as for work over the estimated hours. Owner should budget appropriate amount for budgetary purposes.
The liability of Construction Testing Services (CTS) is limited to CTS's contract value. See attached fee schedule for basis of charges.
Estimate includes portal to portal travel time for nuclear gauge transport from laboratory per requirements of the CA Radiological Health Branch.
PORTAL TO PORTAL TRAVEL TIME FOR NUCLEAR GAUGE USEPORTAL TO PORTAL MILEAGE FOR NUCLEAR GAUGE USE
Estimate revised based on email from Suyesh Shrestha, Town of Los Gatos, dated 2/4/2020, 2/6/2020 and 2/19/2020.
DATE:PROPOSAL No.:CLIENT: PROJECT: LOCATION:
Estimate based on plans by the Town of Los Gatos, dated 1/2/20. No construction schedule was available at the time this estimate was prepared. See attached fee schedule for basis of charges.
EXHIBIT C
Standard Discounted
* FIELD INSPECTION AND LABORATORY SERVICE Rate/Hour Rate/Hour
Steel $195.00 $82.00
Nondestructive - UT, MT, PT $200.00 $85.00
Steel Visual/UT Combination $200.00 $82.00
Concrete ACI $195.00 $82.00
Concrete ICC $195.00 $82.00
Masonry $195.00 $82.00
Fireproofing $195.00 $82.00
Soil Technician w/Nuclear Gauge and/or Sand Cone (portal-to-portal)$195.00 $85.00
Roofing & Waterproofing $195.00
Multi-Disciplined Inspector $195.00
Inspector Requiring G1 Pay Grade $225.00
Specialty Inspector or Where Formal Certification is Required $195.00
Field Inspector with Special Enhancement $195.00
Laboratory Technician $195.00
Technician Typist $195.00
**PROFESSIONAL ENGINEERING SERVICES
Principal Engineer (Civil/Structural)$320.00
Geotechnical Engineer $270.00 $170.00
Consulting Engineer (Civil/Structural)$245.00 $160.00
Associate Engineer, Licensed $220.00 $150.00
Project Manager $195.00 $140.00
Staff Engineer $195.00 $125.00
Field Supervision $170.00 $125.00
ASNT Level III $185.00 $130.00
Drafting $135.00
Quality Control Manager QOR
SPECIAL SERVICES
Portable and Mobile Laboratories, NDT and Soils QOR
* Epoxy Bolt/Expansion Anchor - Installation Observation $195.00 $80.00
*Epoxy Bolt/Expansion Anchor Proof Load Testing (portal-to-portal)$195.00 $80.00
*Coring, 1 Person (including equipment) (portal-to-portal)$180.00
*Coring, 2 Persons (including equipment) (portal-to-portal)$230.00
Project Research QOR
Ultrasonic Testing for Non-Metallic Materials QOR
Pavement Rehabilitation Analysis Using Deflections QOR
Roof Moisture Survey QOR
Soil Drilling Equipment QOR
Geotechnical Site Investigations/Foundation Reports QOR
Pachometer, Schmidt Hammer, Windsor Probe (portal-to-portal)$260.00
Floor Flatness Testing FF/FL - Equipment Fee $110/Day (portal-to-portal)$260.00
Measuring Moisture Vapor Emission Rate (Calcium Chloride) - $50/Kit (portal-to-portal)ASTM F1869 $260.00
Relative Humidity Testing - $70/Kit (portal-to-portal)ASTM F2170 $260.00
Ferroscan - Equipment Fee $110/day (portal-to-portal)$260.00
GPR - Equipment Fee $110/day (portal-to-portal)$305.00
Administration, Secretarial, Special Projects, Notary, Certified Payroll $145.00
Concrete/Grout/Mortar Mix Design Review (less than 48 hours notice - $500) $310.00 $250.00
Welding Procedure Review (less than 48 hours notice - $500)$310.00 $250.00
Welder Qualification Test $210.00
DSA Interim Reports $160.00
Geotechnical Pad Letter (less than 48 hours notice - $500)$310.00
Final Letter (less than 48 hours notice - $500)$310.00 $275.00
EXPERT WITNESS TESTIMONY
Court appearance, per day $2,000.00
Court appearance, per half day $1,000.00
2017 FEE SCHEDULE - P12613 4/28/17
PERSONNEL FEES AND BASIS OF CHARGES
INSPECTIONS, ENGINEERING & SPECIAL SERVICES
* Field inspection services will be billed in accordance with minimums shown on Basis of Charges.
**Professional engineering services and laboratory technician services will be billed at actual time.
INSPECTINGTESTING
ENGINEERING
All fees subject to Basis of Charges
INSPECTINGTESTING
ENGINEERING
GENERAL
MINIMUM HOURLY CHARGES – INSPECTION
Technician personnel and the following minimum charges are contractual commitment:
One-half day or less 4 Hours
Over one-half day 8 Hours
Show-up time (less than 2 hours notice = 4 hour charge) 2 Hours
WORKING HOURS AND PREMIUM TIME
Regular workday is the first 8 hours between 6:00 am and 6:00 pm Monday through Friday. Premium time is as follows:
Overtime, Weekdays and Saturdays (first 8 hours) 1.5 x quoted hourly rate
Overtime Saturdays (over 8 hours) and Sundays (first 8 hours) 2 x quoted hourly rate
Overtime Sundays (over 8 hours) and Holidays 3 x quoted hourly rate
Shift differential, swing and graveyard -
(Work performed between 2:00 pm and 4:00 am) 12.5%/hour additional to base or quoted rate.
MISCELLANEOUS CHARGES - Only Where Applicable
Notary Services Fee $27.50/each
Facsimile Charges. Plus $1.00/page (n/c for cover page) $5.50 minimum
Wireless Router/Data Card for Jobsite Internet $110.00/day
Parking Fees At Cost
Air Travel Cost Plus 5%
Outside Services Cost Plus 20%
Subsistence (per union contract) $120.00/day
Mileage Standard Federal Rate
Sample Pickup $20.00/each $10.00/each
Weekend Sample Pickup $85.00/hour
Project Administration 6% of Monthly Invoice
Samples Made by Others: Concrete Cylinders $110 + Test
Samples Made by Others: All Other Tests $45 + Test
Laboratory Sample Witness Fee $110.00
EZ Cure Boxes (Thermostatically Controlled Curing Boxes) QOR
Returned Check Fee $110.00
TESTS
INSURANCE
PAYMENT
BASIS OF CHARGES
Fees for tests and inspection include cost of technician, normal equipment and regular reports. Engineering services will be charged at applicable rates and will
require travel and mileage charges for equipment transport and storage per code (portal to portal) from the nearest CTS laboratory. Soils testing with nuclear
gauge and/or sand cone equipment and inspections requiring equipment will require applicable travel and mileage charges for equipment transport and storage
per code (portal-to-portal) from the nearest CTS laboratory. Fees for special projects, services overseas, or elsewhere in the United States, will be quoted on
request. With prior notification to Client; charges are subject to change at any time. Construction Testing Services reserves the right to adjust the rates quoted
in this contract based upon any Union or prevailing wage increases and/or changes in any industry requirements.
Testing fees shown include normal time for performing test. Samples requiring special preparation will be charged at the laboratory technician rate. Fees for
tests not listed will be quoted upon request. There will be a minimum charge of $100.00 for any engineering report. Please note some tests maybe tested by
subconsultants. Samples delivered to the laboratory after 3:00pm or samples needing results within 24 hours will incur a 50% mark-up.
For the waiver of subrogation if required by client, a 2% CTS administrative fee will be added to all gross billings/revenue in addition to the 3% fee from State
Fund. The liability of Construction Testing Services (CTS) is limited to CTS's contract value.
Invoices will be submitted monthly or bimonthly for services performed during the preceding month and are payable on receipt. Interest of 1.5% per month (but
not exceeding the maximum rate allowable by law) will be payable on any amounts not paid within 30 days, payment thereafter to be applied first to accrued
interest and then to the principle unpaid amount. Attorney’s fees or other costs incurred in collecting any delinquent amount shall be paid by client. Visa,
MasterCard and American Express payments are accepted however fees will apply. Visa and MasterCard payments require an additional 3% on top of the
amount of the invoice being paid. American Express payments require an additional 4% on top of the amount of the invoice being paid.
All fees subject to Basis of Charges
INSPECTINGTESTING
ENGINEERING
Standard Discounted
CONCRETE Rate/Each Rate/Each
Compressive Strength of Cylindrical Concrete Specimens (6x12) ASTM C39 $66.00 $45.00
Compressive Strength of Cylindrical Concrete Specimens (4x8) ASTM C39 $66.00 $45.00
Compressive Strength of Cylindrical Concrete Specimens (Over 8000 PSI)ASTM C39 $117.00
Cylinder molds. 6” x 12” and 4" x 8" ASTM C470 $55.00
Compressive Strength of Lightweight Insulating Concrete ASTM C495 $77.00
Obtaining and Testing Sawed Beams and Drilled Cores of Concrete (Cores) ASTM C42 $99.00
Flexural Toughness of Fiber Reinforced Concrete (Round Panel) ASTM C1550 $363.00
Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) ASTM C78 $253.00
Flex Beams per Caltrans Test Methods CT523 and CT524 $253.00
Length Change of Hardened Hydraulic-Cement Mortar and Concrete (Shrinkage, 1 Sample) ASTM C157 $121.00
Shotcrete Nozzleman Qualification Letter (Per Nozzleman, Per Position) ACI 506, ASTM C42 and C1140 $363.00
Shotcrete Pre-Qualification Cores (Compression and Visual) ACI 506, ASTM C42 and C1140 $88.00
Shotcrete Production Cores ASTM C1140 $88.00
Coefficient of Thermal Expansion AASHTO T336 $440.00
Determining Density of Structural Lightweight Concrete (Cylinders) ASTM C567 $330.00
Standard Specification for Concrete Made by Volumetric Batching and Mixing ASTM C685 $798.00
Cement Quality Sampling CBC 2010 $550.00
Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete ASTM C472 $44.00
Splitting Tensile Strength of Cylindrical Concrete Specimens ASTM C496 $209.00
Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression ASTM C469 $177.00
Grab Sample, Sealing and Storing in a Humidity and Temperature Controlled Room CBC $121.00
Density of Hydraulic Cement ASTM C188 $160.00
Testing of Controlled Low Strength Material (CLSM) Test Cylinders ASTM D4832 $121.00
GFRC Pull Test PCI $308.00
GFRC Flexural Test PCI $308.00
Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam (Cell-Crete) ASTM C796 $423.00
MASONRY
Compressive Testing of Grout (Masonry) ASTM C1019 $99.00 $60.00
Compressive Strength of Hydraulic Cement Mortars Using 2" Cube Specimens ASTM C109 $99.00 $60.00
Compressive Strength of Masonry Prisms ASTM C1314 $149.00 $100.00
Testing Concrete Masonry Units and Related Units (Core Compression) CBC 2105A.4 $149.00
Compressive Strength of Molded Masonry Mortar Cylinders and Cubes (2" Sample) ASTM C780 A7.6 $99.00 $60.00
Testing Concrete Masonry Units (CMU) and Related Units (Full Unit) ASTM C140 $149.00
Linear Drying Shrinkage of Concrete Masonry Units (Per Unit) ASTM C426 $220.00
Masonry Core Shear Testing CBC 2105A.4 $220.00
Testing Concrete Masonry Units (Absorption, Moisture Content, Unit Weight) ASTM C140 $275.00
Brick and Clay Tile (modulus of rupture, compression, saturation coefficient, suction rate,
efflorescence)*ASTM C67 $825.00
Mortar Molds. 2” x 4”. Single Use $99.00
Mortar or Grout, Stored and Cured, Not Tested (Including Mold)$99.00
AGGREGATES (SOILS AND CONCRETE)
Determining Sieve Analysis of Fine and Coarse Aggregates (Coarse Only) CT202/ASTM C136 $182.00 $125.00
Sieve Analysis of Fine and Coarse Aggregates (Fine Only) CT202/ASTM C136 $242.00 $200.00
Sieve Analysis of Fine and Coarse Aggregates (Wash Included) CT202/ASTM C117 $303.00 $225.00
Sieve Analysis of Fine and Coarse Aggregates (200 Wash Only) ASTM C117 $182.00 $125.00
Evaluating Cleanness of Coarse Aggregate CT227 $303.00
Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate ASTM C88/CT214 $220.00
Unit Weight of Aggregate CT212 $149.00
Clay Lumps and Friable Particles in Aggregates ASTM C142 $175.00
Flat Particles, Elongated Particles or Flat and Elongated Particles in Coarse Aggregate ASTM D4791/CT235 $303.00 $225.00
Organic Impurities in Fine Aggregates for Concrete CT213/ASTM C40 $275.00 $200.00
Density, Relative Density(Specific Gravity), and Absorption of Coarse Aggregate ASTM C127/CT206 $275.00 $225.00
Density, Relative Density(Specific Gravity), and Absorption of Fine Aggregate ASTM C128/CT207 $275.00 $325.00
Resistance to Degradation of Small Size Coarse Aggregate by Abrasion and Impact in the Los
Angeles Machine ASTM C131(535) and C211 $440.00 $300.00
Percentage of Crushed Particles/Standard Test Method for Determining the Percentage of Fractured
Particles in Coarse Aggregate ASTM D5821/CT205
$330.00 $250.00
Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture,
and Grading) ASTM C1252/AASHTO T304A $330.00
Sand Equivalent Value of Soils and Fine Aggregate ASTM D2419/CT217 $220.00 $175.00
Durability Index (Fine)ASTM D3744/CT229 $330.00 $250.00
Durability Index (Coarse)ASTM D3744/CT229 $330.00 $250.00
Durability Index (Fine and Coarse) ASTM D 3744/CT229 $347.00 $275.00
Lightweight Particles in Aggregate ASTM C123/AASHTO T113 QOR
Resistance of Rock to Wetting and Drying CRD-C169 $484.00
*Unusual sample preparation for brick specimen will be charged at the established hourly rate.
CONCRETE AND MASONRY TESTS
All fees subject to Basis of Charges
INSPECTINGTESTING
ENGINEERING
Standard Discounted
SOILS Rate/Each Rate/Each
Direct Shear Test of Soils Under Consolidated Drained Conditions ASTM D3080 $440.00
Caltrans Corrosivity Package $413.00
Determining Field and Laboratory Resistivity and pH Measurements for Soil and Water CT643 QOR
Soils and Waters for Sulfate Content CT417 QOR
Soils and Waters for Chloride Content CT422 QOR
Particle-Size Analysis of Soils (with Hydrometer) ASTM D422 $484.00 $300.00
Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer ASTM D4542
$512.00
Standard Test Method for Particle-Size Analysis of Soils (without Hydrometer) ASTM D422 $440.00 $300.00
Liquid Limit, Plastic Limit, and Plasticity Index of Soils ASTM D4318/CT204 $440.00 $225.00
Laboratory Compaction Characteristics of Soil Using Modified/Standard Effort ASTM D1557/D698 $413.00 $250.00
Hydrometer Only ASTM D422 $440.00
pH of Soils ASTM D4972 $385.00
Relative Compaction of Untreated and Treated Soils and Aggregates CT216 $484.00
Determining the Resistance "R" Value of Treated and Untreated Bases, Subbases, and Basement
Soils by the Stabiliometer ASTM D2844/CT301 $484.00 $300.00
Laboratory Determination of Water(*moisture) Content of Soil and Rock by Mass ASTM D2216/CT226 $121.00 $75.00
Density of Soil in Place by the Drive-Cylinder Method D2937 $94.00
Expansion Index of Soils ASTM D4829 $330.00
Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
(Permeability)ASTM D5084/CT220 $451.00
Lab Compaction Characteristics of Soil 1 Point Proctor (Check Point) ASTM D698/D1557 $275.00
Maximum Index Density and Unit Weight of Soils Using a Vibratory Table ASTM D4253 $231.00
Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density ASTM D4254 $231.00
Density of Hydraulic Cement ASTM C188 $209.00
Volatile Organic Content EPA 8260B QOR
Semi Volatile Organics by GC/Ms (Basic Target List) EPA 8270C QOR
Total Organic Carbon ASTM 2974/EPA 5310Bm QOR
ICP Metals Concentration EPA 6020 - CAM/CCR 17 QOR
Total Extractable Petroleum Hydrocarbons: TPH, MTBE, Benzene,Toluene, Ethylbenzene, Zylenes,
%SS EPA 8015B QOR
ICP Metals Concentration EPA 6020 QOR
pH EPA 9045D $440.00
Sequential Batch Extraction of Waste with Acidic Extraction Fluid ASTM D5284 QOR
Chromium Soluble EPA 7196A QOR
Moisture, Ash and Organic Matter of Peat and Other Organic Soils (Organic Content) ASTM D2974 $220.00
Universal Soil Classification System (USCS) Test ASTM D2487 $242.00
California Bearing Ratio Test ASTM D1883 $303.00
Unconfined Compressive Strength of Cohesive Soil ASTM D2166/CT221 $154.00
ASPHALT
Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (Solvent) ASTM D2172/CT310 $605.00
Determining Low Temperature Performance Grade (PG) of Asphalt Binders ASTM 6816 QOR
Thickness/Height of Compacted Bituminous Paving Mixture Specimens (Cores) ASTM D3549/CT308 $220.00 $50.00
Method of Prep of Bituminous Mixture Test Specimens ASTM D6926/CT304 $220.00
Bulk Specific Gravity and Density of Compacted Bituminous Mixtures (LTMD) ASTM D1188 and D2726/CT308 $825.00 $500.00
Indirect Tensile (IDT) Strength of Bituminous Mixtures (TSR) ASTM D6931/CT371 QOR
Mechanical Size Analysis (Coarse and Fine) of Extracted Aggregate ASTM D5444/CT202 $330.00
Marshall Stability and Flow of Bituminous Mixtures ASTM D6927 $825.00
Theoretical Maximum Specific Gravity and Density (Rice) ASTM D2041/CT309 $330.00 $250.00
Measuring the Permeability of Bituminous Pavements and Seal Coats CT341 QOR
Swell of Bituminous Mixtures CT305 $303.00
Moisture Vapor Susceptibility of Bituminous Mixtures/Moisture or Volatile Distillates in Asphalt ASTM D1461/CT307
$770.00
Stabilometer Value (1 sample) CT366 $303.00 $225.00
Determination of Asphalt Content of Bituminous Paving Mixtures by the Ignition Method CT382/ASTM D6307 $330.00 $250.00
Determination of Correction Factor of Bituminous Paving Mixtures by the Ignition Method CT382/ASTM D6307 $330.00 $250.00
Determination of Asphalt and Moisture Contents of Bituminous Mixtures by Microwave Oven CT370 $330.00 $250.00
Effect of Water on Compressive Strength of Compacted Bituminous Mixtures (Set of 6)ASTM D1075 $2,750.00
Compressive Strength of Bituminous Mixtures ASTM D1074 $220.00
SOILS, AGGREGATE, ASPHALTIC CONCRETE SERVICES & TESTS
* Unusual sample preparation (dried clays, saturated clays, etc.) and all other tests for treated or untreated soils, aggregate subbase and aggregate base will be charged at
established rates for laboratory technician.
** Does not include sample preparation or sieve analysis
All fees subject to Basis of Charges
INSPECTINGTESTING
ENGINEERING
Standard
MATERIALS MECHANICAL TESTS Rate/Each
Mechanical Testing of Steel Products (General Tensile) ASTM A370 $385.00
Fillet Weld Break Test for Qualification (Welding) AWS B4.0 $165.00
Tension Testing of Metallic Materials, Tension Testing Wrought and Cast Aluminum and Magnesium-
Alloy Products, (Welding Coupon Tensile) ASTM E8, B557 and AWS B4.0
$385.00
Mechanical Testing of Steel Products (Couplers) ASTM A370 $375.00
Impact Testing of Miniaturized Charpy V-Notch Specimens, Notched Bar Impact Testing of Metallic
Materials ASTM E2248 and ASTM E23 QOR
Testing, Practices, and Terminology for Chemical Analysis of Steel Products ASTM A751 $275.00
Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #3-#8 ASTM A370 and E290 $303.00
Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #9-#11 ASTM A370 and E290 $363.00
Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #14+ ASTM A370 and E290 QOR
Mechanical Testing of Steel Products, Standard Specification for Steel Wire, Plain, for Concrete
Reinforcement ASTM A370, A82 and A185 $363.00
Guided Bend Test for Ductility of Welds, Mechanical Testing of Welds ASTM E190 and AWS B4.0 $220.00
Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Anchor
Bolts Only (Tension and Yield) ASTM F307, F1554 and F606
$435.00
Rockwell Hardness of Metallic Materials ASTM E18 $121.00
Proof Test for Carbon and Alloy Steel (Nuts Only) ASTM A194 or A563 $275.00
Radiographic Examination of Metallic Castings/Weldments ASTM E94, E1030 and E1032 QOR
Macroetching Metals and Alloys ASTM E340, E381 and AWS $275.00
Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers,
Direct Tension Indicators, and Rivets (HSB Assemblies) ASTM F606
$303.00
Mechanical Testing of Steel Products (Terminators Tensile) ASTM A370 $303.00
Strength for Sewn or Bonded Seams of Geotextiles ASTM D4884 $275.00
Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure ASTM D2261 $275.00
Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM D5034 $220.00
Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars ASTM D3039 $825.00
Steel Strand, Uncoated Seven-Wire for Prestressed Concrete ASTM A416 and A1061 $1,210.00
FIREPROOFING
Thickness and Density of Sprayed Fire-Resistive Material (SFRM) ASTM E605 $220.00
Cohesion/Adhesion of Sprayed Fire-Resistive Materials (Test Kit Only) ASTM E736 $62.00
CONTACT INFORMATION
Headquarters: 2118 Rheem Drive • Pleasanton, CA 94588 • P 925.462.5151 • F 925.462.5183
Peninsula: One Embarcadero Center, Suite 535 • San Francisco, CA 94111 • P 415.334.4747 • F 415.438.2357
Oakland: 246 30th Street, Suite 101 • Oakland, CA 94601 • P 510.444.4747 • F 510.835.1825
Stockton: 343 East Main Street, #711 • Stockton, CA 95202 • P 209.507.7555 • F 209.507.7554
Sacramento: 4770 Duckhorn Drive • Sacramento, CA 95834 • P 916.419.4747 • F 916.419.4774
Las Vegas: 3842 E. Post Road • Las Vegas, NV 89120 • P 702.257.4747 • F 702.257.4718
San Jose: 2033 Gateway Place, #500 • San Jose, CA 95110 • P 408.573.6992 • F 408.437.1201
All fees subject to Basis of Charges