Press Alt + R to read the document text or Alt + P to download or print.
This document contains no pages.
Staff Report with Exhibit.Traffic Impact Policy Update
PREPARED BY: Ying Smith
Transportation and Mobility Manager
Reviewed by: Parks and Public Works Director, Planning Manager, and Community Development
Director
110 E. Main Street Los Gatos, CA 95030 ● (408) 354-6872
www.losgatosca.gov
TOWN OF LOS GATOS
PLANNING COMMISSION
REPORT
MEETING DATE: 11/10/2021
ITEM NO: 5
DATE: November 5, 2021
TO: Planning Commission
FROM: Joel Paulson, Community Development Director
SUBJECT: Review the Draft Updated Traffic Impact Policy and Provide Feedback.
RECOMMENDATION:
Review the Draft Updated Traffic Impact Policy (Draft Policy) and provide feedback.
BACKGROUND:
California Senate Bill (SB) 743, which was signed into law by Governor Brown in 2013, changes
the way that public agencies evaluate the transportation impacts of projects under the
California Environmental Quality Act (CEQA), recognizing that roadway congestion, while an
inconvenience to drivers, is not itself an environmental impact. At its November 17, 2020
meeting, the Town Council adopted a resolution designating the use of vehicle miles traveled
(VMT) as the metric for conducting transportation analyses pursuant to CEQA and establishing
the thresholds of significance to comply with SB 743.
The transition to using VMT as the metric for transportation analyses pursuant to CEQA has
necessitated an update to the current Traffic Impact Policy. The draft 2040 General Plan
Implementation Program identifies a program called Transportation Analysis Guidelines:
“Develop and adopt transportation analysis (TA) guidelines that define the VMT analysis
methods, significant impact thresholds, Travel Demand Management programs, and mitigation
programs consistent with the requirements of SB 743.”
At its June 10, 2020 meeting, the Planning Commission received an update on the VMT
transition for CEQA analysis.
PAGE 2 OF 3
SUBJECT: Draft Updated Traffic Impact Policy
DATE: November 5, 2021
DISCUSSION:
The Draft Updated Traffic Impact Policy (Exhibit 1) includes major updates to the current policy.
The new content in the Draft Policy is simplified by separating out the different elements of the
Draft Policy. The proposed revisions, including supporting documents, also enhance the details
used to determine what projects are subject to the Draft Policy and subsequently the technical
requirements used in preparing analyses.
The Draft Policy is organized as follows:
Section I. General Conditions and Applicability: This includes the language in the current
policy in sections II-1, II-2, VII-2, and VII-3. Minor edits were provided for clarity and
consistency.
Section II. Traffic Impact Mitigation Fees: This includes the original language in sections
III-1, 2, 3, 4, and V.
Section III. VMT Mitigation Measures: This is a new addition specific to VMT.
Attachment 1 - Transportation Analysis (TA) Guidelines: This new document provides
detailed guidance in conducting analyses.
Attachment 2 - Town of Los Gatos Traffic Mitigation Improvements Project List: No
change was made to the current Attachment 1. The attachment was re-numbered.
Attachment 3 - VMT Reduction Actions for the Town of Los Gatos: This new attachment
provides supporting documentation for mitigation actions projects will need to take.
This attachment is not all inclusive, but rather provides categories and examples.
Attachment 4 - Definitions: This list of definitions was expanded and modified to be
consistent with the definitions in the Town Municipal Code, Chapter 15, Article VII,
Traffic Impact Mitigation Fees, and Resolution 2020-045.
Attachment 1, TA Guidelines, was prepared to reflect Resolution 2020-045, Designating the Use
of Vehicle Miles Traveled as the Metric for Conducting Transportation Analyses Pursuant to the
California Environmental Quality Act and Establishing the Thresholds of Significance to Comply
with California Senate Bill 743. The Town continues to require Level of Service (LOS) analysis to
assess impacts from new developments on the local roadway performance.
The TA guidelines have many technical details therefore it is more appropriate to be included as
an attachment to the Draft Policy. The key elements and changes from the current policy are
that it:
PAGE 3 OF 3
SUBJECT: Draft Updated Traffic Impact Policy
DATE: November 5, 2021
1. Explains the different requirements for transportation analyses for different project
types: land use entitlements, land use projects; and transportation improvements.
2. Establishes different analysis guidelines per the CEQA Guidelines, Congestion
Management Program compliance, and Town’s transportation policies.
3. Establishes the different procedures to evaluate land use projects that are compliant
with the General Plan and those that are not.
4. Establishes the VMT analysis methods and provides guidance for projects to propose
VMT mitigation measures.
5. Establishes the guidelines for CEQA analysis for transportation projects.
6. Enhances the guidelines for LOS analysis for land use projects and provides guidance on
proposing transportation improvements to address a deficiency caused by a project.
To complete the VMT transition work the Town will need to complete the environmental
review for the General Plan update and complete the update to the Town’s Traffic Impact
Mitigation Fees program.
The Town is in the process of updating the General Plan and the Draft Environmental Impact
Report (DEIR) for the 2040 General Plan was released for public review in July 2021. The 2040
General Plan DEIR identifies significant but unavoidable transportatio n impacts and the
mitigation measures. The Town is taking a townwide approach for VMT impact mitigation. The
Draft Policy includes the VMT Reduction Actions that provides a framework for mitigating VMT
in the Town.
One of the implementation actions would be to update the Traffic Impact Mitigation Fees
program and prepare a nexus study to incorporate the VMT reduction strategies. As an
immediate next step, staff is planning to bring a recommendation to the Town Council to issue
a Request for Proposals to select a consultant for the services. Updating the Traffic Impact
Mitigation Fees program will be required to provide a path for land use projects to complete
CEQA clearance.
CONCLUSION:
Staff recommends the Planning Commission review the Draft Updated Traffic Impact Policy and
provide feedback.
ENVIRONMENTAL ASSESSMENT:
This is not a project defined under CEQA, and no further action is required.
EXHIBIT:
1. Draft Updated Traffic Impact Policy
This Page
Intentionally
Left Blank
COUNCIL POLICY MANUAL
TITLE: Traffic Impact Policy POLICY NUMBER:
EFFECTIVE DATE: December xx, 2021 PAGES: 3
ENABLING ACTIONS: 1991-174; 2014-017,
2016-068; 2017-011; 2021-xx
REVISED DATES: 8/5/91; 3/24/14; 12/6/16;
3/21/17; xx/xx/21
APPROVED:
PURPOSE
To provide guidance to Town staff and the development community in implementing the
provisions of the Town Municipal Code, Chapter 15, Article VII, Traffic Impact Mitigation Fees,
and mitigate California Environmental Quality Act (CEQA) transportation impacts.
SCOPE
This Policy is applicable to all land use entitlements, land use projects, and transportation
improvements Town-wide.
POLICY
I.GENERAL CONDITIONS AND APPLICABILITY
1.Projects that are determined by the Town to generate one or more new net Average
Daily Trips (ADT) are subject to this Policy.
2.An Accessory Dwelling Unit (ADU) shall be exempted from the requirements of
Transportation Analysis and the Traffic Impact Fees.
3.The Town Council may exempt housing developments for very low, low, and moderate
income residents (as defined by Town Ordinance, General Plan, or statute) from all or a
portion of the traffic impact mitigation fee upon making a finding that the development
provides a significant community benefit by meeting current needs for affordable
housing.
Small Town Service Community Stewardship Future Focus
EXHIBIT 1
TITLE: Traffic Impact Policy
PAGE:
2 of 3
POLICY NUMBER:
4. Attachment 1 - Transportation Analysis (TA) Guidelines establish a process to
comprehensively and accurately analyze potential project effects (adverse and
beneficial) on transportation facilities and services in the Town of Los Gatos and other
jurisdictions. The TA Guidelines serve three primary purposes:
• Provide an evaluation for the California Environmental Quality Act (CEQA) significant
impacts and mitigation as a part of the environmental analysis process.
• Evaluate a project’s consistency with the Town’s General Plan.
• Evaluate a project’s consistency with the Santa Clara County Congestion
Management Program (CMP).
II. TRAFFIC IMPACT MITIGATION FEES
1. All Projects that generate one or more new Average Daily Trips are required to pay
Traffic Impact Mitigation Fees.
2. All required Traffic Impact Mitigation Fees shall be paid in full to the Town in
association with and prior to issuance of a building permit. If no building permit is
required, the fee shall be paid in full prior to issuance of a certificate of use and
occupancy, or similar entitlement. The amount due shall be calculated based on
the fee in place as approved by the Town Council by resolution at the time the fee
is paid.
3. The per trip amount of the fee shall be as set forth by the Town Council by
resolution, pursuant to Town Municipal Code, Chapter 15, Article VII, Traffic Impact
Mitigation Fees.
4. Fees shall be calculated by multiplying net new ADT by the per trip amount in place
at the time the fees are paid.
5. Credit against Traffic Impact Mitigation Fees due shall be granted up to the amount
of the Estimated Project Cost shown on Attachment 2, Town of Los Gatos Traffic
Mitigation Improvements Project List, for any listed projects for which the
developer, as a condition of approval, is required to either construct at the
developer's sole cost or contribute a fixed or percentage amount of funding toward
future construction of the listed improvement. Where construction is fully funded
and completed by the developer, said credit shall be equal to the Project Cost as
shown in Attachment 2. Where payment is a fixed amount or a percentage of
Project Cost, credit shall be equal to the actual amount due, whether the project is
constructed by the developer or others.
6. No credit shall be given for any public right-of-way dedication required for
TITLE: Traffic Impact Policy
PAGE:
3 of 3
POLICY NUMBER:
completion of projects listed on Attachment 2.
7. Credit will be given on a case-by-case basis and shall not exceed the impact fee
payable. Any request for credit shall be made prior to the payment of the Traffic
Impact Mitigation Fees. No credit shall be given for installation of Town-standard
frontage improvements, Project access improvements, or internal circulation
improvements.
8. Credit shall only be granted for payment of costs or construction of projects listed
in Attachment 2, unless otherwise approved by the Town Council.
III. VEHICLE MILES TRAVELLED MITIGATION MEASURES
1. To mitigate VMT impacts, the project may be conditioned for implementation of
measures in the following:
• Modify the project’s built environment characteristics to reduce VMT generated by
the project;
• Implement transportation Demand Management (TDM) measures to reduce VMT
generated by the project; and/or
• Participate in a VMT fee program and/or VMT mitigation exchange/banking program
(if they exist) to reduce VMT from the project or other land uses to achieve
acceptable levels.
2. The Town is taking a townwide approach for VMT impact mitigation. Attachment 3, VMT
Reduction Actions for the Town of Los Gatos, provides a framework for mitigating VMT
in the Town.
3. Evaluation of VMT reductions should be conducted using state-of-the-practice
methods, recognizing that many of the TDM strategies are dependent on building
occupant performance over time. As such, actual VMT reduction cannot be reliably
predicted, and monitoring may be necessary to gauge performance related to mitigation
expectations.
APPROVED AS TO FORM:
Robert Schultz, Town Attorney
This Page
Intentionally
Left Blank
i
TITLE: Traffic Impact Policy
Attachment 1 - Transportation Analysis Guidelines
PAGE:
POLICY NUMBER:
Town of Los Gatos
Transportation Analysis Guidelines (DRAFT)
Table of Contents
1. Introduction .......................................................................................................................... 1
1.1 Intent of TA Guidelines ........................................................................................................ 1
1.2 Environmental Evaluation ................................................................................................... 2
1.3 Project Types ....................................................................................................................... 2
1.4 CEQA and Non-CEQA Terminology ...................................................................................... 3
2. Determining the Level of Transportation Analysis ................................................................ 3
2.1 CEQA Relief for Projects Consistent with General Plan or Zoning ....................................... 4
2.2 CMP Consistency Screening ................................................................................................ 4
2.3 Recommended Process and Documentation ...................................................................... 4
2.4 Contact with Appropriate Town Staff .................................................................................. 5
2.5 Consultation with Other Jurisdictions ................................................................................. 5
2.6 Project Trip Generation and Trip Reductions ...................................................................... 5
2.6.1 Vehicle Trips ................................................................................................................. 6
2.6.2 Person Trips .................................................................................................................. 6
2.6.3 Establishing Trip Generation Rates for an Unspecified Use .......................................... 6
2.6.4 Credit for Existing Trips ................................................................................................ 7
2.7 Vehicle Miles Traveled Methods ......................................................................................... 7
3. Transportation Analysis (CEQA) for Land Use Projects .......................................................... 8
3.1 VMT Analysis Methods ........................................................................................................ 8
3.1.1 Regional Transportation Plan/Sustainable Communities Strategy and General Plan
Consistency ........................................................................................................................... 9
3.1.2 VMT Assessment .......................................................................................................... 9
3.2 VMT Significance Thresholds ............................................................................................. 11
ii
3.3 VMT Mitigation Measures ................................................................................................. 11
4. Transportation Analysis (CEQA) for Transportation Projects ............................................... 12
5. Transportation Analysis per the Town’s Transportation Policies ........................................ 12
5.1 Study Area ......................................................................................................................... 13
5.2 Key Study Elements ........................................................................................................... 13
5.3 Data Collection .................................................................................................................. 14
5.4 Project Site Access and Circulation Review ....................................................................... 16
5.5 Analysis Scenarios ............................................................................................................. 16
5.6 Analysis Time Periods ........................................................................................................ 17
5.7 Multimodal Analysis Methods ........................................................................................... 18
5.8 Traffic Operations Analysis ................................................................................................ 19
5.9 Mobility Deficiency Criteria ............................................................................................... 19
5.10 CMP Deficiency Criteria ................................................................................................... 21
5.11 Mitigation Improvements ............................................................................................... 21
1
1. Introduction
Transportation Analysis (TA) Guidelines are routinely established by jurisdictions to assess
potential transportation effects of proposed projects on the local transportation system. These
guidelines are intended to provide a clear and consistent technical approach to evaluating both
land use and transportation infrastructure projects within Los Gatos.
These guidelines establish a process to comprehensively and accurately analyze potential
project effects (adverse and beneficial) on transportation facilities and services in the Town of
Los Gatos and other jurisdictions. This information is essential for decision-makers and the
public when evaluating land use development and transportation infrastructure projects. These
TA Guidelines serve three primary purposes:
• Provide an evaluation for the California Environmental Quality Act (CEQA) significant
impacts and mitigation as a part of the environmental analysis process.
• Evaluate a project’s consistency with the Town’s General Plan.
• Evaluate a project’s consistency with the Santa Clara County Congestion Management
Program (CMP).
1.1 Intent of TA Guidelines
The Town of Los Gatos General Plan 2040 seeks to “provide a well-connected transportation
system that enables safe access for all transportation modes, including pedestrians, bicyclists,
motorists, and transit riders of all ages and abilities.” The TA Guidelines support this goal by
evaluating new projects against the policies of the latest General Plan. The TA Guidelines are
intended to provide guidance to Town staff and the development community in implementing
the provisions of the Town Municipal Code, Chapter 15, Article VII – Traffic Impact Mitigation
Fees. Additionally, the TA Guidelines are used to determine consistency with Santa Clara
County’s CMP and compliance with the California Environmental Quality Act (CEQA) Statute &
Guidelines.
For CEQA-based environmental analysis, these TA Guidelines incorporate the use of vehicle
miles traveled (VMT) to disclose the effects of the project on the surrounding environment.
Town staff completed an SB 743 1 implementation process, which included the preparation of
the SB 743 Implementation for the Town of Los Gatos (July 2020) document package. The
document package provides detailed technical information pertaining to the options and data
considered by the Town of Los Gatos to implement VMT as an impact criterion.
The TA Guidelines present the Town’s approach for determining the need for a transportation
analysis, its content, and identifying acceptable transportation improvements for land use and
1 Senate Bill 743 (SB 743) changed some of the transportation significance criteria under the California
Environmental Quality Act (CEQA) CEQA. Specifically, vehicle level of service (LOS) is no longer used as a
determinant of significant environmental impacts, and a vehicle miles traveled (VMT) analysis is required.
2
transportation projects proposed within Los Gatos. The TA Guidelines establish a transportation
analysis protocol for the following:
• Environmental analysis
• General plan consistency
• Town’s traffic impact policy and level of service
• Congestion Management Program (CMP) evaluation
• Mobility deficiency criteria and thresholds
• Guidance on acceptable transportation improvements
Town staff will review transportation studies and reports based on the process presented in the
TA Guidelines. However, each project is unique, and the TA Guidelines are not intended to be
prescriptive beyond practical limits. Not all criteria and analyses described in the TA Guidelines
will apply to every project. Early and consistent communication with Town staff is encouraged
to confirm the type and level of analysis required for each study.
1.2 Environmental Evaluation
The TA Guidelines outline the methods and thresholds with which to evaluate projects
consistent with the latest CEQA Statue & Guidelines.
The latest CEQA Statue & Guidelines include revised Appendix G Checklist questions for
transportation impact evaluation. The four questions are as follows:
Would the project:
a) Conflict with a program, plan, ordinance, or policy addressing the circulation
system, including transit, roadway, bicycle, and pedestrian facilities?
b) Would the project conflict or be inconsistent with CEQA Guidelines Section
15064.3, subdivision (b)?
c) Substantially increase hazards due to a geometric design feature (e.g., sharp
curves or dangerous intersections) or incompatible uses (e.g., farm equipment)?
d) Result in inadequate emergency access?
1.3 Project Types
A TA is prepared for a project before a discretionary action is taken. The following types of
projects, which involve development activity or infrastructure changes in and around the Town
of Los Gatos and affect the adjacent transportation system, should be evaluated for TA
requirements.
• Land use entitlements or changes in use requiring discretionary approval by Los Gatos,
which include General Plan amendments, specific plans (and related amendments),
zoning changes, use permits, planned developments, and tentative subdivision maps; or
any modifications of use that would generate 20 or more new Peak Hour (vehicle) Trips
or at the discretion of the Town’s Traffic Engineer
3
• Land use activity advanced by agencies other than Los Gatos that is subject to
jurisdictional review under state and federal law, such as school districts, Santa Clara
Valley Transportation Authority (VTA) Board of Directors, and others; or advanced
within Los Gatos by agencies other than the Town and inconsistent with the Town’s
General Plan.
• Transportation infrastructure modification or expansion, including capital
improvement projects on Town roads, county roads, and state highways that may
impact Town facilities and services.
The Determining the Level of Transportation Analysis section identifies specific project
parameters or “triggers” that may necessitate a TA.
1.4 CEQA and Non-CEQA Terminology
To distinguish the CEQA analysis from the non-CEQA analysis (i.e., the local transportation
analysis) the analyses apply different terminologies as summarized below in Table 1.
Table 1: Comparison of Select CEQA and Non-CEQA Terms
CEQA Term Non-CEQA Term
CEQA Transportation Analysis Local Transportation Analysis
Significance criteria Threshold or performance standard
Significant impact Deficiency
Mitigation measure Mitigation improvement
Baseline Conditions Existing Conditions and Background
Conditions
Future Year Cumulative Conditions Cumulative Conditions
2. Determining the Level of Transportation Analysis
Unless explicitly waived by the Town, a TA may be required when any one of the following
conditions is met.
• A project has the potential to create a significant transportation environmental impact
under CEQA.
• A project has the potential to generate daily vehicle miles traveled greater than the
Town’s General Plan future year VMT projections.
• For local transportation analysis, a project has the potential to generate 20 or more new
Peak Hour (vehicle) Trips.
4
• A project that is not consistent with the latest General Plan or Zoning Code.
• A non-Town project will alter physical or operational conditions on a Town pedestrian
facility, bicycle facility, transit facility or service, or other transportation facility.
• An Accessory Dwelling Unit (ADU) shall be exempted from the requirements of
Transportation Analysis and the Traffic Impact Fees.
In general, a TA is applicable for two to five years. After two or more years of inactivity, a TA
may need to be updated to reflect changes in the study environment, including traffic growth
and other circulation issues.
Nothing in the Traffic Impact Policy shall prohibit or restrict a Project applicant from completing
a traffic study for a Project anticipated to generate less than 20 new Peak Hour trips.
2.1 CEQA Relief for Projects Consistent with General Plan or Zoning
Projects consistent with a general plan, zoning action, specific plan, and certified environmental
impact report (EIR) would not require additional environmental review, except as might be
necessary to examine whether there are project-specific significant effects. Additionally,
projects consistent with a general plan, zoning action, or specific plan where cumulative
impact(s) were adequately addressed in a prior EIR would not require further analysis under
cumulative conditions.
2.2 CMP Consistency Screening
Projects should reference the most recent VTA Transportation Impact Analysis (TIA) Guidelines
to determine the need for a transportation impact analysis. In most cases, projects that
generate fewer than 100 net new peak hour vehicle trips are not required to conduct VTA’s
CMP transportation analysis.
2.3 Recommended Process and Documentation
In coordination with Town staff, the project applicant shall retain a transportation professional
to conduct the TA. The transportation consultant should seek Town acceptance of the scope of
work before initiating the analysis. In some cases, review by other affected jurisdictions will be
required. Appendix A: Transportation Analysis Report Format Outline contains a
recommended outline for the TA document.
Each TA will begin by preparing a scope of work that describes the project description, site
location, analysis methods, area-wide assumption, study elements, study time periods, and
traffic data collection methods. To finalize a TA scope of work, the project applicant will provide
an estimate of the project trip generation, trip distribution, and vehicle miles traveled. These
estimates and scope of work should be shared with Town staff to finalize the scope of services.
Overall, the TA report will address: 1) environmental analysis, 2) project site access and
circulation, and 3) other traffic impacts.
5
2.4 Contact with Appropriate Town Staff
To minimize the potential for delays in project processing, it is important for the TA to be
prepared in coordination with Town staff. Timely coordination will also ensure that potential
transportation improvements and environmental consequences are considered as early as
possible in the planning process, as deficiencies and corresponding improvement costs can
have a substantial effect on project costs. Coordination should include the following:
• A pre-application meeting, which will include a discussion of the TA requirements.
• Development of an approved scope of work, which includes trip generation, study area,
analysis scenarios and parameters, data requirements, and provisions for pedestrians,
bicyclists, and transit users.
• Approval of the project trip generation (person and vehicle), trip distribution, and
vehicle miles traveled estimates.
• Review of all assumptions and the results of Existing Conditions analysis.
• Review of the administrative draft report, with adequate time for comments.
• Review of a draft report, with adequate time for comments.
If the TA report information will be incorporated into the transportation and circulation section
of an environmental document (e.g., Initial Study, Mitigated Negative Declaration, or
Environmental Impact Report), the format of this report may need to be discussed with the
environmental consultant, a peer reviewer, and/or Town staff. Upon circulation of the draft
environmental document, the format of the final TA report may need to be discussed with the
environmental consultant.
2.5 Consultation with Other Jurisdictions
If the study area overlaps with other jurisdictions, staff from other jurisdictions must be
consulted to verify study locations, the impact significance criteria, and to consider any current
development applications. Section 15086 of the CEQA Statue & Guidelines 2 shall be followed as
the basis for satisfying consultation requirements. In most cases, overlap will occur for roadway
system analysis, but may also include impact analysis of active transportation modes (bicycling
and walking), as well as transit system facilities and services.
2.6 Project Trip Generation and Trip Reductions
Person and vehicle trip generation rates are a way to estimate the number of expected
pedestrian, bicycle, transit, and vehicle trips that a proposed development will generate. These
rates establish the basis of analysis for a proposed project and its effects on the transportation
network. Person trip generation should be reported for walking, bicycle, and pedestrian trips,
and vehicle trip generation should be reported for single-occupant, and carpool.
2 California Environmental Quality Act Statute & Guidelines, 2020.
6
Methodologies to estimate project trip generation and trip reductions shall be prepared
consistent with the latest Transportation Impact Analysis (TIA) Guidelines adopted by the VTA,
with the exceptions described in the Guidelines.
2.6.1 Vehicle Trips
Consistent with Transportation Impact Analysis (TIA) Guidelines adopted by the Santa Clara
County Transportation Authority (VTA) Congestion Management Program, Pass-by Trips shall
not be considered in calculating the 20 new Peak Hour Trip threshold that triggers the
requirement for conducting a comprehensive traffic impact analysis report.
The Institute of Traffic Engineers (ITE) Trip Generation Manual trip generation rates for
Specialty Retail Center shall apply to all Specialty Retail uses as defined in this policy.
Uses within the Central Business District (C-2 Zone} are expected to change periodically as part
of the natural business cycle. For the purpose of Traffic Impact Fees, changes in use without
changes in net building square footage within the C-2 Zone shall not be considered to create a
traffic impact, shall be exempt from this policy, and no fees shall be charged for a change in
use. Any increases in building square footage shall pay impact fees at the ITE Shopping Center
rate or comparable equivalent rate for the expanded area, as determined by the Town Traffic
Engineer.
The Town reserves the right to require the project sponsor to conduct local trip generation
surveys for select projects, depending on land use and conditions in the field.
2.6.2 Person Trips
Person trip generation rates should be developed from empirical studies, person travel survey
data, or conversion of vehicle trip rates to person trip rates using a vehicle occupancy factor. In
addition, person trip generation by mode may be derived using an approved analysis tool that
incorporates data from local trip generation surveys or published trip generation rate data.
2.6.3 Establishing Trip Generation Rates for an Unspecified Use
For projects where the ultimate land use is not certain (for example, a large subdivision of
flexible commercial-industrial parcels), there are two options for establishing the trip
generation rates.
• Option 1: Town staff will recommend the use of the highest traffic intensity among all
permitted uses to establish traffic impacts.
• Option 2: Estimates can be made using a lower traffic intensity use if the Town and
developer establish a maximum trip allowance. Once a proposed land use has been
identified, then: 1) the subdivision trip generation allowance must be monitored by the
Town as development occurs; and 2) the TA report may need to be updated.
7
2.6.4 Credit for Existing Trips
The estimate of new trips generated by the proposed development project may include credit
for trips associated with existing uses on the site. Uses are considered as existing if they are
actively present on the project site at the time that data is gathered for the transportation
impact analysis. Similarly, if a planned (but not constructed) use was already permitted for the
site and an improvement(s) was identified and funded, the new TA only needs to assess the
effects of additional trips above and beyond the trips for the permitted use. Additionally,
certain commercial land uses attract vehicle traffic that currently exists on the roadway, rather
than generating new trips.
Understanding there are permitted reductions that may be taken under the circumstances
listed above, the Town requires that any reductions in project vehicle trip generation are
applied according to the latest VTA TIA Guidelines.
In calculating new Peak Hour Trips for purposes of determining whether or not a traffic impact
analysis report is required pursuant to this Policy, trip credit shall be granted for an existing use
or the most recent former use.
In calculating new Average Daily Trips for purposes of determining the amount of the Traffic
Impact Mitigation Fee due, trip credit shall be granted for an existing use or the most recent
former use.
Where the property is vacant, the most recent former use shall be used.
Where a portion of the space is changing use, credit will apply to the proportionate square
footage of the space under review.
Where the change in use results in fewer trips than the existing or former use, no credit or
refund will be due the applicant.
2.7 Vehicle Miles Traveled Methods
Although the calculation of VMT is simply the number of cars multiplied by the distance
traveled by each car, VMT performance measures can be reported differently. At a minimum,
the VMT analysis for Los Gatos will be prepared for two purposes:
• Greenhouse gas and air quality analysis using project generated VMT on a VMT per
service population basis (residents + employment).
• Environmental evaluation by land use and/or transportation project.
The project generated VMT from new population and employment growth and the boundary
(total) VMT for a specific geographic area will be prepared using the latest Santa Clara Valley
Transportation Authority (VTA)-City/County Association of Governments of San Mateo County
(C/CAG) Bi-County Model (“VTA Travel Model”). Because emissions rates vary by vehicle speed,
8
the project generated VMT and total VMT should be disaggregated by speed bin (typically in
five mile an hour increments of speed from 0 to ~80 miles per hour) to allow different
emissions factors to be applied at different speeds, which allows for the preparation of a more
refined emissions analysis.
3. Transportation Analysis (CEQA) for Land Use Projects
For an environmental analysis, these TA Guidelines incorporate the use of vehicle miles
traveled (VMT) to disclose the effects of the project on the environment. Town staff completed
an SB 743 implementation process, which included the preparation of the SB 743
Implementation for the Town of Los Gatos (July 2020) document package. The document
package provides detailed technical information pertaining to the options and data considered
by the Town of Los Gatos to implement VMT as an impact criterion.
At its November 17, 2020 meeting, the Town Council adopted Resolution 2020-045, Designating
the Use of Vehicle Miles Traveled as the Metric for Conducting Transportation Analyses
Pursuant to the California Environmental Quality Act and Establishing the Thresholds of
Significance to Comply with California Senate Bill 743.
Based on the Town’s implementation of SB 743, the following methods should be used to
determine VMT impact thresholds and mitigation requirements for land use projects.
3.1 VMT Analysis Methods
The Town elected to conduct a complete VMT analysis consistent with the General Plan future
year VMT projections based on long-term expectations for air quality and GHG expectations as
part of its General Plan EIR, so that it could make specific use of CEQA Statue & Guidelines
Section 15183 to streamline project-specific CEQA analysis that is consistent with its General
Plan and other Town documents. For the Town of Los Gatos, addressing transportation VMT
impacts in the Town General Plan EIR is a useful way of understanding VMT impacts and how
VMT reduction should be balanced against other community values related to the environment,
social justice, and the community. By conducting a Townwide VMT impact analysis, the Town is
able to develop a program-based VMT mitigation approach. The concept of a ‘program’
approach to impact mitigation is commonly used in a variety of technical subjects, including
transportation, air quality, GHG, and habitat. Absent a new program-level VMT mitigation
approach, there are limited feasible mitigation options for project sites, and as a result limited
ability to reduce VMT. Also, practically speaking, without feasible mitigation, significant VMT
impacts would be significant and unavoidable (SAU). Under these circumstances, a project must
prepare an EIR, thus adding time and cost to environmental review compared to an initial
study/negative declaration (IS/ND) that relies on streamlining offered in the CEQA Statue &
Guidelines.
Should a project not be consistent with the General Plan, or for some other reason unable to
benefit from streamlined CEQA review under CEQA Statue & Guidelines Section 15183, the
9
following sections provide details on how to conduct a complete VMT analysis for land use
plans and projects in the Town of Los Gatos.
3.1.1 Regional Transportation Plan/Sustainable Communities Strategy and General Plan
Consistency
The first step in assessing project impacts is to determine if the project land use is contained
within the Town of Los Gatos residential and non-residential land use allocations in the current
Regional Transportation Plan/Sustainable Communities Strategy (RTP/SCS), and if the project is
consistent with the latest General Plan. If the project is not consistent with the RTP/SCS and/or
the latest General Plan, amendments to those documents or the project would be needed prior
to proceeding with the project review.
3.1.2 VMT Assessment
Projects not consistent with the current RTP/SCS or the latest General Plan are required to
complete a VMT analysis using the VTA Travel Model to determine if there would be a
significant VMT impact. The tools and methodology of the VMT analysis shall be approved by
PPW Director (or Traffic Engineer). The impact analysis includes two types of VMT:
1. Total Project Generated VMT – Daily VMT of all vehicle trips, vehicle types, and trip
purposes for all project land uses, presented as a total project generated VMT.
2. Project’s Effect on VMT within the Town of Los Gatos. VMT that occurs within the
Town of Los Gatos by any type of vehicle. This captures all on-road vehicle travel on a
roadway network for any purpose, and includes local trips as well as trips that pass
through the area without stopping.
If the land use control totals increase between the without and with project conditions in the
travel model, these VMT metrics will need to be expressed on a per service population
(residents, employees, and other populations generating the VMT) basis to understand the
effects of the project between scenarios.
The types of VMT analysis are evaluated for the following scenarios:
• Baseline Conditions – Conditions in the baseline year for the CEQA analysis, which is
most often chosen as the time of notice of preparation (NOP) of an environmental
document, but may be chosen as the baseline year of the VTA Travel Model, if land use
and transportation network conditions can be considered largely unchanged between
the model baseline year and the date of the NOP. For compliance with the CEQA Statute
& Guidelines Section 15125(a), the transportation impact analysis must include a
description of the physical environmental conditions near the project, as they exist at
the time the NOP is published, or if no NOP is published, at the time environmental
analysis is commenced, from both a local and regional perspective. Baseline VMT
estimates will be prepared using the most recent base year VTA Travel Model.
10
• Baseline with Project Conditions – The project land use is added to the project TAZ, or a
separate TAZ may be created to contain the project land uses. A full model run is
performed and VMT changes (by metric of choice) are isolated for the project TAZ and
across the full model network. The model output must include reasonableness checks of
the production and attraction balancing to ensure the project effect is accurately
captured. If this scenario results in a less-than-significant impact, then additional
cumulative scenario analysis may not be required.
• Future Year Cumulative Conditions – Conditions requiring an RTP/SCS and/or General
Plan amendment are also required to evaluate the project effect on VMT under Future
Year Cumulative Conditions. This scenario buildout of the region’s land use and
transportation system also provides the long-range view of future travel patterns.
Future Year Cumulative Conditions VMT estimates should be based on the horizon year
of the most recent VTA Travel Model, ensuring the model does not already contain the
land uses or transportation improvements associated with the project.
• Future Year Cumulative with Project Conditions – The project land use is added to the
project TAZ, or a separate TAZ is created to contain the project land uses. The addition
of project land uses may be accompanied by a reallocation of a similar amount of land
use from other TAZs throughout the model area (focusing on Santa Clara County),
especially if the proposed project is significant in size such that it would potentially
reduce the potential for development throughout the rest of the model area. Land use
projects will generally not change the Future Year Cumulative Conditions control totals
for population and employment growth within the model area. Instead, they will
influence the land use supply through changes in General Plan land use designations and
zoning. If project land uses are simply added to the Future Year Cumulative Conditions
scenario, then the analysis should reflect this limitation in the methods and
acknowledge that the analysis may overestimate the project’s effect on VMT. A full
model run is performed and VMT changes (by metric of choice) would be isolated for
the project TAZ and across the full model network. The model output must include
reasonableness checks of the production and attraction balancing to ensure the project
effect is accurately captured.
The model output should include the two VMT metrics listed earlier: 1) total project generated
VMT, and 2) project’s effect on VMT using the total boundary VMT. Emissions vary by speed
bin; disaggregating VMT by speed bin allows different emissions factors to be applied at
different speeds, which allows for the preparation of a more refined emissions analysis. The
total boundary VMT is needed as an input for air quality, greenhouse gas (GHG), and energy
impact analysis, while the project generated VMT metrics are used for the transportation
impact analysis.
Both “with project” scenarios noted above will summarize the two types of VMT and be
compared to the without project condition.
Project generated VMT should be extracted from the VTA Travel Model by combining either the
origin-destination (for total VMT) or production-attraction (for the other metrics) trip matrices
11
and congested skims (travel distances for each origin-destination pair in the travel mode) from
final assignment. The VMT should be adjusted to reflect trips that extend beyond the model
boundary. The project’s effect on VMT should be estimated using the Town limit boundary and
extracting the total link-level VMT for both the without and with project conditions. Additional
VMT metric specifications may be found in the SB 743 Implementation for the Town of Los
Gatos (July 2020) document package.
If a project is mixed-use (i.e., composed of both residential and retail/office uses), project
generated VMT should be extracted for both the total VMT and VMT per service population
(residents and employees).
3.2 VMT Significance Thresholds
The Town Council adopted Resolution 2020-045, Designating the Use of Vehicle Miles Traveled
as the Metric for Conducting Transportation Analyses Pursuant to the California Environmental
Quality Act and Establishing the Thresholds of Significance to Comply with California Senate Bill
743. The thresholds balance the Town’s priorities with respect to competing objectives,
including Los Gatos’s geographic and transportation context, greenhouse gas reduction goals,
interest in achieving the state’s greenhouse gas reduction goals, and the latest General Plan
goals and policies related to land use mix, economic development, and housing provision.
3.3 VMT Mitigation Measures
To mitigate VMT impacts, the following choices are available to the applicant:
1. Modify the project’s built environment characteristics to reduce VMT generated by the
project;
2. Implement transportation Demand Management (TDM) measures to reduce VMT
generated by the project; and/or
3. Participate in a VMT fee program and/or VMT mitigation exchange/banking program (if
they exist) to reduce VMT from the project or other land uses to achieve acceptable
levels.
The 2040 General Plan Draft Environmental Impact Report (DEIR), released for public
comments in July 2021, identifies significant but unavoidable transportation impacts and the
mitigation measures:
Impact T-2. Development and population growth facilitated by the 2040 General Plan
would increase VMT in Los Gatos. VMT per service population in 2040 would exceed
applicable thresholds specific to the Town. Therefore, the 2040 General Plan would
conflict or be inconsistent with CEQA Guidelines Section 15064.3, subdivision (b).
Impacts would be significant and unavoidable.
T-1 VMT Reduction Strategies. For projects that would generate VMT, one or more VMT
reduction strategies included in the SB 743 Implementation Decisions for the Town of
Los Gatos (July 2020) document shall be required to reduce VMT of the project.
12
Examples of VMT reduction strategies that shall be implement are provided in Section
4.15, Transportation.
As part of the SB 743 Implementation Decisions for the Town of Los Gatos (July 2020), key TDM
measures that are appropriate to the Town of Los Gatos were identified. The Town is taking a
townwide approach for VMT impact mitigation. Attachment 3, VMT Reduction Actions for the
Town of Los Gatos, provides a framework for mitigating VMT in the Town.
Evaluation of VMT reductions should be conducted using state-of-the-practice methods,
recognizing that many of the TDM strategies are dependent on building occupant performance
over time. As such, actual VMT reduction cannot be reliably predicted, and monitoring may be
necessary to gauge performance related to mitigation expectations.
4. Transportation Analysis (CEQA) for Transportation Projects
Transportation Analysis for transportation projects shall follow the latest CEQA Guidelines and
related technical advisories from the Governor’s Office of Planning and Research (OPR).
Town Resolution 2020-045 established the Thresholds of Significance for all Transportation
Projects:
A significant impact would occur if the project is inconsistent with the Regional
Transportation Plan/Sustainable Community Strategy Plan (Plan Bay Area).
Transportation projects that reduce, or have no impact on, vehicle miles traveled should be
presumed to cause a less than significant transportation impact.
In 2020 Caltrans adopted its guidance under SB 743. The department’s Transportation Analysis
Framework and Transportation Analysis for CEQA provide guidance for assessing induced travel
impacts from prospective projects on the State Highway System. CEQA analysis for proposed
transportation projects on the State Highway System should also follow Caltrans guidance.
5. Transportation Analysis per the Town’s Transportation
Policies
The contents and extent of a transportation analysis per the Town’s General Plan and per the
Traffic Impact Policy (No. 1-05) depend on the location and size of the proposed development,
the prevailing transportation conditions in the surrounding area, and questions from decision-
makers and the public. The Town is committed to a well-connected transportation system that
enables safe access for all modes of travel. The methods presented in this chapter include
robust data collection and analysis techniques for pedestrian, bicycle, and transit networks, in
addition to vehicle circulation.
13
5.1 Study Area
The study area is determined by evaluating the project location and how it may affect all
transportation modes and facilities. It is not simply a map showing where the project is located.
Rather, the study area is the area of influence of a project. Each local transportation analysis
will consider the adjacent transportation system for site access and circulation of land
development projects and street modifications for transportation projects. To properly assess
the site access, the Town may require off-site intersection analysis and/or other multimodal
analysis.
The study area may include the nearest CMP facility to evaluate the proposed project’s
conformity with the CMP facilities.
Applicants should consult with Town staff early regarding the need for a local transportation
analysis based on local or site-specific issues, especially those related to pedestrians, bicyclists,
and transit users.
5.2 Key Study Elements
The extent and complexity of a local transportation analysis will vary on the project attributes.
Table 2 summarizes the basic requirements for a local transportation analysis for every project
requiring a complete transportation analysis. Specific significance criteria for each of the listed
elements are described in further detail in the Transportation Analysis (CEQA) for Land Use
Projects and Transportation Analysis (CEQA) for Transportation Projects sections. To avoid
substantial off-site improvements or changes to the project site plan/description after the
transportation analysis is completed, a preliminary site plan shall be included for a “fatal flaw”
evaluation.
Table 2: Local Transportation Analysis – Evaluation Criteria
Study Element Evaluation Criteria
General Plan
Consistency
Evaluate the project against goals, policies, and actions set forth in the
latest General Plan and other applicable Town plans.
Parking
Compare the project parking plan with Town and local specific plan
standards and discuss how the proposed supply will affect demand for
walking, bicycling, and transit modes. If a mix of land uses is proposed on
site, or complements adjacent land uses, justify how the development will
make use of shared on-site parking.
On-Site
Circulation
Review and evaluate site access locations, turning radii, truck loading areas,
emergency access, and other site characteristics with respect to operations
and safety for all modes of transportation.
Pedestrian
Facilities
Identify any existing or planned pedestrian facilities that may be affected by
the project. Document how the project will affect local pedestrian
circulation (e.g., disclose how widening a road or adding a driveway will
affect pedestrian safety and walking time).
14
Table 2: Local Transportation Analysis – Evaluation Criteria
Study Element Evaluation Criteria
Bicycle
Facilities
Identify any existing or planned facilities that may be affected by the
project.
Transit
Identify any existing or planned transit facilities that may be affected by the
project. If appropriate, document how the project improves access to or
utilization of transit. For system planning, use crush load as capacity, not
seated capacity.
Safety
Assessment
Evaluate project trips added to safety enhancement projects within the
study area that are proposed as part of other future safety studies by the
Town or other agencies.
Trucks (or
Other Large
Vehicles)
For relevant industrial projects, identify the number of truck trips that will
be generated, and design facilities necessary to accommodate these trucks.
Automated
Vehicles or
Transportation
Network
Company Pick-
up/Drop-Off
For projects where automated vehicles and/or transportation network
companies may have a large concentration of pick-up/drop-off, the project
site circulation and pick-up/drop-off areas must be reviewed to identify
opportunities and constraints of the project site. Modifications to the site
circulation and/or pick-up/drop-off may be recommended.
Off-Site Traffic
Operations
All roadway facility analysis and Level of Service should be conducted using
the latest version of the Highway Capacity Manual (HCM).
Intersection
Traffic Control
Evaluate unsignalized intersections located within the study area to
determine appropriate traffic control. Analysis should include
documentation of the appropriateness of a roundabout as an alternative or
replacement to a traffic signal.
Other Issues
Consider other issues on a case-by-case basis (e.g., construction
deficiencies, queuing between closely spaced intersections, emergency
access, special event traffic)
Other
Jurisdictional
Requirements
In situations where several agencies must approve a development or are
responsible for affected roadways, the applicant must contact lead and
responsible agencies to determine issues to be addressed, scope of study,
etc. In general, the applicant will be responsible for analyzing project
impacts against appropriate jurisdictional thresholds; however, the analysis
method will be determined by the Town in compliance with CEQA, and the
impacts will be mitigated consistent with Town standards.
5.3 Data Collection
Accurate data is essential to achieve a high level of confidence in local transportation analysis
results. Existing transportation data shall be collected using the requirements set forth below.
Data should be presented on maps or figures where appropriate. To address the specific needs
of each project, the extent of data collected shall be at the discretion of Town staff.
15
• Pedestrian/Bicycle Facilities – Document the existing pedestrian and bicycle facilities
serving the project site. Elements will include presence and width of sidewalks, curb
ramps, crosswalks, or other pedestrian facilities providing access to the nearest
attractors of the project site, such as transit stops, neighborhood attractors and/or
complimentary land uses, and bicycle facilities (e.g., routes, lanes, or shared-use paths)
within a two-mile bicycling distance of the project site. Document barriers, deficiencies,
and high pedestrian-demand land uses, including schools, parking, senior housing
facilities, and transit stops or centers. The report will note any deficiencies or
enhancements planned or recommended in the latest General Plan or future planning
documents.
• Transit Facilities and Ridership – Document transit lines nearest to the project site,
including stop locations, frequency of service, and any capacity issues. It will also
describe transit stop amenities (e.g., benches, shelters, etc.).
• Multimodal Peak-Period Turning Movement Counts – Turning movement counts,
including vehicles, bicycles, and pedestrians, will be collected for each study time period
at all study intersections. The following parameters will be followed (fall and spring days
while school is in session are preferred):
o Data collection will cover at least two hours to ensure the peak hour is observed.
o As applicable, 48-hour machine counts will be used to identify the peak period
before conducting other counts or analysis.
o Traffic volumes should not be influenced by a holiday, weather, construction, or
other temporary change.
o The percent of traffic that consists of heavy trucks will be noted/estimated
during data collection.
o Some projects may require vehicle classification or occupancy counts. Consult
with Town staff on a case-by-case basis.
o Traffic counts that are older than two years at study initiation will not be used
without consultation and approval by Town staff. These counts may need to be
adjusted to reflect current year traffic volumes.
• Daily Traffic Counts – Collect data for all study roadway segments using the parameters
described above for peak period turning movement counts, with the exception of
bicycle and pedestrian volumes. Daily counts are used to size facilities (e.g., 2-lane vs. 4-
lane) and to identify temporal changes in traffic.
• Roadway Geometry – Document existing roadway and intersection geometries and lane
configurations. Information from aerial photography and street views should be verified
based on a site visit(s).
• Intersection Controls and Signal Timings – For use in intersection analysis, intersection
control types and signal timings and phasing should be based on signal timing sheets
(available from Los Gatos or Caltrans) and verified during site visits.
• Five-Year Collision Data – Obtain Statewide Integrated Traffic Records System (SWITRS)
through the local California Highway Patrol or through the following web site:
www.chp.ca.gov/switrs.
16
• Mode Split – Summarize daily and peak hour mode split for the study area land uses.
Data could include U.S. Census journey-to-work data, empirical surveys, or any other
available surveys.
5.4 Project Site Access and Circulation Review
A detailed site plan review is required for all projects. The local transportation analysis should
include a review and summary of findings of the following qualitative and quantitative features.
• Roundabout xxx
• Existence of any current traffic problems in the local area, such as a high-collision
location, non-standard intersection or roadway, or an intersection in need of a traffic
signal.
• Applicability of context-sensitive design practices compatible with adjacent
neighborhoods or other areas that may be impacted by the project traffic.
• Proximity of proposed site driveway(s) to other driveways or intersections.
• Adequacy of the project site design to convey all vehicle types.
• Number and type of parking provided, including vehicle and bicycle parking.
• On- and off-street loading requirements.
• Adequacy of on-site vehicle, bicycle, and pedestrian circulation and provision of direct
pedestrian paths from residential areas to school sites, public streets to commercial and
residential areas, and the project site to nearby transit facilities.
An important aspect of a TA is to provide sufficient information for the Town to determine that
a project is consistent with the latest General Plan and other applicable Town policies, plans,
and standards. As such, individual projects must be reviewed against relevant policies
contained in the latest General Plan or other plans and policies. Applicants should review the
full policy statements in the latest General Plan Mobility Element.
If the study area extends into an adjacent jurisdiction, the applicant may be responsible for
analyzing project generated operational impacts in these jurisdictions. These include
intersection or segment locations in any other jurisdiction, including Caltrans-maintained
facilities. The applicant shall refer to current policies in the respective jurisdiction to identify the
appropriate significance criteria.
5.5 Analysis Scenarios
The range of scenarios includes Existing Conditions, Background Conditions, and Cumulative
Conditions. Projects consistent with the latest General Plan will only be required to complete
the Existing and Background conditions analysis; where Existing Conditions looks at the effect of
the proposed project on the existing system within the next year or two, Background
Conditions typically looks at a longer time frame of about three to five years. Inclusion of all
three analysis conditions (e.g., Existing, Background, and Cumulative), would typically occur for
large development projects, General Plan amendments, specific plans (and related
amendments), with Cumulative Conditions having a time horizon of 10 to 20 years.
17
The following analysis scenarios will document existing or future conditions, any deficiencies,
and identify deficiencies that will result from the addition of the project. Each scenario will
include a qualitative description of transportation facilities for all modes (and any planned
enhancements), traffic volumes, and a quantitative analysis of intersection LOS. Key study
elements are identified in the Multimodal Analysis Methods section of this chapter. Details
regarding each local transportation analysis scenario are presented below.
• Existing Conditions – These conditions are based on recent field observations and
recent traffic count data.
• Existing with Project Conditions – Traffic volume forecasts for roadway analysis
reflecting Existing Conditions with traffic generated by the proposed project. For reuse
or conversion projects, this may involve accounting for any existing use of the site that
remains or will be removed. It should also qualitatively describe how the project will
affect transportation for other modes, including compliance or relation to other Town
documents.
• Background Conditions – Traffic volume forecasts for roadway segment and
intersection analysis should reflect Existing Conditions with growth due to approved
development that is expected to be operational before or concurrently with the
proposed project. This scenario may not be needed if the study area has limited or no
approved developments.
• Background with Project Conditions – This scenario represents the Background
Conditions with vehicle trips added by the proposed project. It provides decision-makers
and the public with a view of conditions with all recently approved development and
physical improvements, including the proposed project.
• Future Year Cumulative Conditions – This scenario represents transportation conditions
for all travel modes in the study area reflecting all approved projects, pending projects,
or expected development of other areas of Los Gatos designated for growth under the
latest General Plan or specific plan. In most cases, the project site will likely be vacant
under this scenario. In some cases, this scenario may need to account for any existing
uses on the site that could continue, and potential increases in development allowed by
ministerial approvals.
• Cumulative with Project Conditions – This scenario represents the cumulative future
transportation conditions with anticipated changes to the transportation system and the
additions of project trips, and provides the long-range view of future traffic operations.
5.6 Analysis Time Periods
Based on the land use of the proposed project and upon consultation with Town staff, the study
shall analyze traffic operations during the peak one hour of the following time periods:
• Weekday morning peak (7:00 – 10:00 AM)
• Weekday evening peak (4:00 – 7:00 PM)
18
For some projects, the Town may substitute or require additional peak hour analysis for the
following time periods as approved or requested by the Town’s Traffic Engineer:
• Weekday afternoon peak (2:00 – 4:00 PM)
• Friday evening peak (4:00 – 7:00 PM)
• Weekend midday peak (11:00 AM – 1:00 PM)
• Sunday or holiday evening peak (4:00 – 7:00 PM)
For example, retail commercial projects should evaluate operations for Saturday midday peak
hour conditions, in addition to the standard weekday morning and evening peak periods. The
determination of study time periods should be made separately for each proposed project,
based upon the peaking characteristics of the project generated traffic and peaking
characteristics of the adjacent street system and land uses.
5.7 Multimodal Analysis Methods
The report should provide a quantitative and/or qualitative evaluation of the project’s potential
adverse or beneficial effects on transportation facilities and services related to pedestrians,
bicyclists, and transit users.
For some projects, more detailed multimodal analysis may be required. Such analysis shall be
decided upon in consultation with Town staff and consider new tools, methods, and
performance measures, such as those listed below.
• Multimodal LOS – The latest Highway Capacity Manual (6th Edition) contains methods
for multimodal LOS.
• Tiered Level of Service Policy – A tiered level of service (LOS) standard uses standard
vehicle LOS metrics but applies different standards depending on the context of the
transportation system and adjacent land uses. Often a more rigorous standard will be
applied in residential neighborhoods to prioritize relatively low traffic volumes, while a
more lenient standard will be applied in downtowns or active commercial areas to allow
for slower travel speeds, higher traffic volumes, and encouragement of transit and
active modes.
• Person Delay – Simulation models can be used to measure system performance in
terms of overall person-delay for all modes within a transportation network. This
method provides a better decision-making tool for developing improvements to
promote efficient movement of people, rather than a particular type of vehicle.
• Safety Assessment – Evaluate whether the project adds vehicle trips to a safety
improvement identified within the study area. (If a project may affect a Caltrans facility,
a safety assessment may be needed for CEQA purposes as well.)
• Bicycle Level of Stress (LTS) – Evaluate LTS for all bicycle facilities within a two-mile
bicycling distance of the project site. There are several methods for evaluating LTS for
bicycle facilities, which generally rely on street widths/number of vehicle lanes, vehicle
speeds, daily volumes, and type of bicycle facility to evaluate “low stress” bike
19
networks. The Low-Stress Bicycling and Network Connectivity (2012) report and the
National Association of City Transportation Officials (NACTO) Urban Bikeway Design
Guide, Second Edition (2014) contains methods for LTS.
• Pedestrian Level of Stress (LTS) – Evaluate LTS for all pedestrian facilities providing
access to the nearest attractors (e.g., transit stops, neighborhood attractors and/or
complimentary land uses) of the project site. Compared to bicycle LTS, there are parallel
methods for calculating pedestrian comfort using best practiced from the NACTO Urban
Street Design Guide (2013) and pedestrian safety research. As with bicycle comfort,
pedestrian comfort is based on a variety of factors ranging from the quality and
presence of sidewalks to the conditions of the adjacent roadway (speed, number of
travel lanes, frequency of trucks).
• Activity Connectedness – Travel time for each mode (e.g., walking, bicycles, transit, and
vehicles) between the project and surrounding land uses can be used to gauge the
degree of accessibility for a project. The Town desires to minimize travel time to
necessary destinations while minimizing unnecessary vehicle travel. Tools such as
geographic information systems or online tools (e.g., Index and Walk Score) can be used
to gauge this measure specifically for walking. The main idea is to evaluate activity
centers and destinations around projects to ensure that walk times to necessary
destinations are minimized and the walking experience is comfortable.
5.8 Traffic Operations Analysis
Traffic operational deficiencies shall be analyzed using standard or state-of-the-practice
professional procedures. The main issues related to traffic operations analysis are the method,
input data, and assumptions. These three items influence the level of confidence and the
associated level of defensibility of the local transportation analysis. For traffic operations, this
requires following the procedures and techniques published in the most recent Highway
Capacity Manual (HCM).
Traffic Operations Analysis should be conducted according to the latest VTA Traffic Level of
Service Guidelines.
5.9 Mobility Deficiency Criteria
The overall guiding principal of the General Plan 2040 Mobility Element is to, “[p]rovide a well-
connected transportation system that enables safe access for all transportation modes,
including pedestrians, bicyclists, motorists, and transit riders of all ages and abilities.” Los Gatos
evaluates each transportation mode to identify deficiencies. Local transportation analyses
evaluate intersection operations focused on specific traffic issues such as queuing and safety. A
greater emphasis is placed on pedestrian, bicycle, and transit facilities and services, in part to
reduce traffic congestion and air quality impacts associated with automobile use. Table 5
outlines deficiency criteria for each mode. The mobility deficiency criteria can be used to
identify conflicts with existing or planned multimodal facilities.
20
Table 5: Mobility Deficiency Criteria
Study Element Deficiency Determination
Parking Project increases off-site parking demand above a level required by the
Town Zoning Code and/or desirable by the Town.
On-Site
Circulation
Project designs for on-street circulation, access, and parking fail to meet
Town standards. Where Town standards are not defined, industry
standards [Highway Design Manual, California Manual on Uniform Traffic
Control Devices (MUTCD), etc.] should be referenced, as appropriate.
Failure to provide adequate accessibility for service and delivery trucks on
site, including access to loading areas. Project will result in a hazard or
potentially unsafe conditions without improvements.
Pedestrian
Facilities
Project fails to provide safe and accessible pedestrian connections
between project buildings and adjacent streets, trails, and transit
facilities.
Bicycle Facilities
Project disrupts existing or planned bicycle facilities or is otherwise
inconsistent with the latest General Plan, Bicycle and Pedestrian Master
Plan, or other related plans. Project adds bicycle trips along project
frontage to an existing facility that needs improvements per the latest
BPMP.
Transit Project disrupts existing or planned transit facilities and services or
conflicts with Town adopted plans, guidelines, policies, or standards.
Heavy Vehicles
(Trucks and
Buses)
A project fails to provide adequate accommodation of forecasted heavy
traffic or temporary construction-related truck traffic consistent with
Town or industry standards (Highway Design Manual, MUTCD, etc.).
Off-Site Traffic
Operations
95th percentile vehicle queues exceed the existing or planned length of a
turn pocket. The proposed project introduces a design feature that
substantially increases safety hazards.
Signalized
Intersection
Traffic Control
Addition of project traffic causes a signalized intersection to 1) drop more
than one level overall or at the worst individual approach delay if it is at
LOS A, B, or C or 2) drop at all overall or at the worst individual approach
delay if it is at LOS D or below.
Unsignalized
Intersection
Traffic Control
Addition of project traffic causes an all-way stop-controlled or side street
stop-controlled intersection to 1) operate at LOS E or F overall or the
worst-case movement, and 2) meets the Caltrans signal warrant criteria.
General Plan
Consistency
Evaluate the project against mobility, safety, and other related goals,
policies, and actions set forth in the latest General Plan.
Other Subject
Areas
Consider other areas on a case-by-case basis (e.g., construction impacts,
queuing between closely spaced intersections, emergency access, special
event traffic, etc.).
Requirements
for Other
Jurisdictions
The project exceeds established deficiency thresholds for transportation
facilities and services under the jurisdiction of other agencies.
21
5.10 CMP Deficiency Criteria
To determine consistency with the CMP, off-site intersection analysis may be needed and
should be applied according to the latest VTA TIA Guidelines.
5.11 Mitigation Improvements
All project deficiencies should be addressed consistent with the policies of the latest General
Plan Mobility Element. Under these circumstances, the applicant should meet with Town staff
to identify transportation improvements that address the deficiencies. Table 6 shows example
types of improvements to address transportation deficiencies.
Potential improvements may require a more detailed review, often including traffic operations,
to demonstrate how they address a specific deficiency.
Selected improvements should be identified whether they will be implemented under Existing
Conditions, Background Conditions, or Cumulative Conditions. Background Conditions generally
reflect conditions at the time of full occupancy of a project.
If a transportation improvement is selected to address a deficiency, it should include a
description of the benefit to traffic reduction generated by a proposed development and how
the improvement contributes to the multimodal transportation system in Los Gatos. In
addition, all transportation improvements need to consider whether they have secondary
effects to VMT [i.e., whether the improvement is VMT inducing per guidance in the OPR
Technical Advisory (December 2018, Pages 20-21)].
The improvement shall not unreasonably degrade bicycle, pedestrian or transit access, and
circulation. If a project proposes improvements in response to auto LOS deficiency involving a
change to existing roadway or intersection geometry, or changes to signal operations, the TA
shall analyze and disclose secondary effects on other modes, i.e., whether the mitigation would
affect pedestrian or bicycle conditions or increase transit vehicle delay, per the methodologies
in 5.7.
Table 6: Example Improvements
Study Element Improvement
Project Modifications
and Transportation
Demand Management
• Alter density or diversity of project uses or integrate
affordable housing
• Encourage telecommuting and alternative work schedules
• Provide ride-sharing programs to encourage carpooling and
vanpooling
• Provide local shuttle service
• Provide employer-sponsored vanpools or shuttles
• Provide pedestrian network improvements
• Provide traffic calming measures and low-stress bicycle
network improvements
22
• Implement car-sharing (e.g., ZipCar) program
• Limit parking supply
• Unbundle parking costs from property costs
• Institute on-street market pricing for parking
Pedestrian and Bicycle
Facilities
• Provide for access to, from, and through the development
for pedestrians and bicyclists
• Construct Class I bicycle paths, Class II bicycle lanes, and
other facilities
• Provide secure bicycle parking and shower amenities
• Reduce travel lanes on a street to install a two-way left-turn
lane and Class II bicycle lanes
• Add corner bulbouts, reduce curb radii, add pedestrian
refuges, or implement other walking-related improvements
Transit Facilities
• Provide bus turnouts, bus shelters, additional bus stops, and
park-and-ride lots
• Fund increases in transit service
Parking Facilities
• Design parking facilities to allow free-flow access to and
from the street
• Provide off-street parking per Town standards or
recommendations
• Implement shared parking among complementary land uses
Traffic Control
Modifications
• Provide for yield or stop control
• Evaluate unsignalized intersections with substandard LOS
for conversion to roundabout intersection control or
for signalization
• Provide coordination/synchronization of traffic signals along
a corridor
• Provide turn-lane channelization through raised islands
• Restrict selected turning movements
Street Operations
Modifications
• Optimize location of access driveway(s)
• Provide improvements to traffic signal phasing, or lengthen
existing turning pocket
• Provide additional through traffic lane(s), right-turn lane(s),
and left-turn lane(s) if they do not adversely impact other
modes or induce additional vehicle travel
• Reduce travel lanes on a street to install a two-way left-turn
lane
• Address congestion pricing on roads or within a specific area
23
Appendix A: Transportation Analysis Report Format Outline
Sections for All Transportation Analysis Reports
1. Introductory Items
• Front Cover/Title Page
• Table of Contents, List of Figures, and List of Tables
• Executive Summary
2. Introduction
• Project description
• Project sponsor/contact info
• Type and size of development
• Site plan (include proposed driveways, roadways, traffic control, parking facilities,
emergency vehicle access, and internal circulation for vehicles, bicyclists, and
pedestrians)
• Location map (include major streets, study intersections, and neighboring zoning and
land uses)
• Scope of transportation analysis
3. Current Conditions
• Description of existing street system within project site and surrounding area
• Location and routes of nearest public transit system serving the project
• Location and routes of nearest pedestrian and bicycle facilities serving the project
• Vehicle Miles Traveled Assessment
o Description of baseline VMT estimates (may include site and regional VMT
estimates)
• Intersection Analysis for Site Access and Circulation Evaluation and CMP Evaluation
o Figure of study intersections with peak hour turning movement counts, lane
geometries, and traffic control
o Map of study area showing average daily traffic (ADT) of study roadways
o Table of existing peak hour average vehicle delay and level of service (LOS)
24
4. Vehicle Miles Traveled and Project Trip Generation
• Table of project generated vehicle miles traveled estimates
• Table of project generated trip estimate
• Figure/map of trip distribution (in percent)
5. Project Site Access and Circulation Evaluation
• Summary of a detailed site review for all modes of travel
• Mobility deficiency analysis and summary to vehicle, transit, bicycle, and pedestrian
facilities (under Project Conditions and Cumulative Conditions)
• Summary of transportation improvements
Transportation Analysis (CEQA) Report Section
6. Vehicle Miles Traveled Assessment
• Summary of project generated VMT under Baseline Conditions
• Summary of project’s effect on VMT under Future Year Cumulative Conditions
• Identification of significant impacts
• Discussion of mitigation measures
• Evaluation of impacts of mitigation measures
7. Other CEQA Requirements
• Summary of conflicts with a plan, ordinance, or policy addressing the circulation
system, including transit, roadways, bicycle lanes, and pedestrian paths. Present
mitigation measures, as needed.
• Evaluation of hazards due to a geometric design feature (e.g., sharp curves or
dangerous intersections) or incompatible uses (e.g., farm equipment). Present
mitigation measures, as needed.
• Emergency access evaluation. Present mitigation measures, as needed.
Local Transportation Analysis (Non-CEQA) Report Section (Project Requiring Off-Site Analysis)
8. Existing with Project Conditions
25
• Maps of study area with applicable peak hour turning movements (Project Only and
Existing with Project Conditions)
• Table of Existing Conditions and Existing with Project Conditions intersection peak hour
average vehicle delay and LOS (or other multimodal performance measure)
• Traffic signal and other warrants
• Changes/Deficiencies to bike, pedestrian, and transit networks
• Findings of project deficiencies
• Improvements for project deficiencies (include a map showing physical improvements)
• Scheduling and implementation responsibility of improvements
• Deficiencies of proposed improvements
9. Background Conditions
• Table of trip generation for approved project(s)
• Figure and/or table of approved projects trip distribution (in percent)
• Map of study area with applicable peak hour turning movements (Background
Conditions)
• Table of intersection peak hour average vehicle delay and LOS (or other multimodal
performance measure) (including queue lengths, etc)
• Changes/deficiencies to bike, pedestrian, and transit networks
• Traffic signal and other warrants
10. Background with Project Conditions
• Similar content to Existing with Project Conditions
11. Cumulative Conditions and Cumulative with Project Conditions
• Map of study area with Cumulative Conditions peak hour turning movements
• Map of study area with Cumulative with Project Conditions peak hour turning
movements
• Table of Cumulative Conditions and Cumulative with Project Conditions intersection
peak hour average vehicle delay and LOS (or other multimodal performance measure)
• Changes/Deficiencies to bike, pedestrian, and transit networks
• Traffic signal and other warrants
26
• Findings of project deficiencies
• Improvements for project deficiencies (include a map showing physical improvements)
• Scheduling and implementation responsibility of improvements
• Deficiencies of proposed improvements
Additional Sections for Transportation Analysis Report
12. Construction Deficiencies
• Trips due to construction workers
• Truck trips and truck access routes
13. Phasing Deficiencies (For Large Projects Only)
14. Appendices
• List of references
• List of authors
• Pedestrian, bicycle, and vehicle counts
• Technical calculations for all analyses
TITLE: Traffic Impact Policy
Attachment 2 - Traffic Mitigation Improvements Project List
PAGE:
1 of 1
POLICY NUMBER:
Town of Los Gatos Traffic Mitigation Improvements Project List
Source
Description
Estimated
Project Cost
(2014 $)
Growth
Related
Project Cost
Share
Mitigation
Impact Fee
Eligible Cost
GP/VTP 2035 Blossom Hill Rd and Union Ave Intersection Improvements $ 1,200,000 90.00% $ 1,080,000
GP/VTP 2035 Los Gatos - Almaden Rd Improvements $ 3,000,000 50.00% $ 1,500,000
GP/VTP 2035 Los Gatos Blvd Widening - Samaritan Dr to Camino Del Sol - Road widening,
new sidewalks and bike lanes $ 4,000,000 50.00% $ 2,000,000
GP/VTP 2035 Union Ave Widening and Sidewalks - complete ped and bike routes $ 3,000,000 50.00% $ 1,500,000
GP/VTP 2035 Wood Rd Gateway on Santa Cruz Ave - roundabout $ 1,200,000 50.00% $ 600,000
GP/VTP 2035 Central Traffic Signal Control System $ 750,000 9.68% $ 72,600
GP/VTP 2035 Hwy 9 Los Gatos Creek Trail connector - new path and bridge for ped/bike $ 1,000,000 50.00% $ 500,000
GP/VTP 2035 Hwy 9/N. Santa Cruz Ave Intersection Improvements $ 1,400,000 90.00% $ 1,260,000
CIP Roberts Road Improvements from bridge to University $ 600,000 50.00% $ 300,000
CIP Pollard Road Widening from Knowles to York Avenue $ 2,500,000 50.00% $ 1,250,000
CIP Sidewalks infill - Van Meter, Fischer and Blossom Hill Schools $ 1,000,000 50.00% $ 500,000
CIP Winchester Blvd/Lark Avenue Intersection Improvements $ 850,000 90.00% $ 765,000
CIP Westbound Lark to Hwy 17 northbound ramps - add two right-turn lanes $ 3,750,000 90.00% $ 3,375,000
CIP Unfunded Deferred Street Maintenance (Annual PMS Survey) $ 10,500,000 9.68% $ 1,016,400
GP Lark/Los Gatos Intersection Improvements - Add Third Left Turn Lanes for
Eastbound and Northbound Approaches $ 1,200,000 90.00% $ 1,080,000
GP Complete Street Improvements - Lark from Garden Hill to Los Gatos Blvd $ 2,100,000 50.00% $ 1,050,000
GP Complete Street Improvements - SR 9 from University to Los Gatos Blvd $ 650,000 50.00% $ 325,000
GP Complete Street Improvements - Blossom Hill Road from Old Blossom Hill
Road to Regent Drive $ 3,000,000 50.00% $ 1,500,000
GP Complete Street Improvements - Knowles from Pollard to Winchester $ 2,000,000 50.00% $ 1,000,000
GP Complete Street Improvements - Winchester from Blossom Hill to Lark $ 1,500,000 50.00% $ 750,000
GP Blossom Hill Road widening over Highway 17 $ 2,000,000 50.00% $ 1,000,000
GP Local Bikeway Improvements $ 750,000 50.00% $ 375,000
Notes: Total $ 47,950,000 $ 22,799,000
VTP = Valley Transportation Plan, 2035 by Santa Clara Valley Transportation Authority.
Town CIP = Town of Los Gatos, Capital Improvement Program and pending construction project list.
Source: Town of Los Gatos.
TITLE: Traffic Impact Policy
Attachment 3 - VMT Reduction Strategies
PAGE: 1 of 3
POLICY NUMBER:
VMT REDUCTION STRATEGIES
For projects that would generate VMT, one or more VMT reduction strategies included in
the SB 743 Implementation Decisions for the Town of Los Gatos (July 2020) document shall
be required to reduce VMT of the project. Examples of VMT reduction strategies that shall
be implement are provided below. The VMT reduction strategies are organized by their
relative scale for implementation (i.e., individual site level, Town-wide level, and regional
level).
INDIVIDUAL SITE LEVEL
Encourage Telecommuting and Alternative Work Schedules: This strategy relies on
effective internet access and speeds to individual project sites/buildings to provide
the opportunity for telecommuting. This strategy would reduce commute VMT but
also result in a change in VMT for other travel purposes; thus, this strategy should
consider the net change in the Town’s project-generated VMT.
Provide Ride-Sharing Programs: This strategy focuses on encouraging
carpooling and vanpooling by project site/building tenants.
Provide Local Shuttles: This strategy focuses on providing local shuttle service. The
local shuttles would provide service to transit hubs, schools, commercial centers, and
residential areas to improve transit connectivity and address the “first/last mile”
problems. Alternatively, a demand responsive service could be provided as subsidized
trips by contracting to private transportation network companies (TNCs) or taxi
companies. Note that implementation of this strategy would require regional or local
agency implementation.
Provide Employer-Sponsored Vanpool/Shuttle: This strategy relies on employers
purchasing or leasing vans or shuttles, and often subsidizing the cost of at least program
administration, if not more. Vanpools typically service employee’s commute to work,
while shuttles service nearby transit stations and surrounding commercial centers.
Scheduling and rider charges, if any, are within the employer’s purview.
TOWN-WIDE LEVEL
Provide Bicycle and Pedestrian Network Improvements: This strategy focuses on
creating a comprehensive bicycle and pedestrian network within the project and
connecting to nearby destinations. Projects in Los Gatos tend to be smaller so the
emphasis of this strategy would likely be the construction of network improvements
that connect the project site directly to nearby destinations. Alternatively,
implementation could occur through an impact fee program or benefit/assessment
district based on regional or local plans such as the Bicycle and Pedestrian Master Plan
and Connect Los Gatos.
Provide Traffic Calming Measures: This strategy combines the California Air Pollution
Control Officers Association (CAPCOA) research focused on traffic calming with new
research on providing a low-stress bicycle network. Traffic calming creates networks
with low vehicle speeds and volumes that are more conducive to walking and
bicycling. Building a low-stress bicycle network produces a similar outcome. One
TITLE: Traffic Impact Policy
Attachment 3 - VMT Reduction Strategies
PAGE: 2 of 3
POLICY NUMBER:
potential change in this strategy over time is
that ebikes (and e-scooters) could extend the effective range of travel on the bicycle
network, which could enhance the effectiveness of this strategy.
Implement Car-Sharing Program: This strategy reduces the need to own a vehicle or
reduces the number of vehicles owned by a household by making it convenient to
access a shared vehicle for those trips where vehicle use is essential. Examples
include programs like ZipCar, Car2Go, and Gig.
Limit Parking Supply: When combined with companion TDM measures, reduced
parking supply discourages driving by limiting easy and convenient parking options.
Implementation of this strategy may require reducing (or removing) minimum parking
requirements and allowing developers to use shared parking strategies.
Unbundle Parking Costs from Property Cost: Unbundling separates parking costs from
property cost, for instance by not including a parking space in a residential unit’s rent,
or by requiring employers to lease each parking space separately from the building
owner. This strategy ensures that the user understands that the cost of driving includes
parking and can encourage people to use an alternative mode to save money.
Implement Market Price Public Parking (On-Street): This strategy focuses on
implementing a pricing strategy for parking by pricing all on-street parking in central
business districts, employment centers, and retail centers. Priced parking would
encourage “park once” behavior and may also result in area-wide mode shifts.
REGIONAL LEVEL
Increase Density: This strategy focuses on increasing density of land uses, where
allowed by the General Plan and/or Zoning Ordinance, to reduce distances people
travel and provide more travel mode options. This strategy also provides a foundation
for many other strategies. For example, densification increases transit ridership, which
justifies enhanced transit service.
Increase Diversity of Urban and Suburban Developments: This strategy focuses on
inclusion of mixed uses within projects or in consideration of the surrounding area to
minimize vehicle travel in terms of both the number of trips and the length of those
trips.
Increase Transit Accessibility: This strategy focuses on encouraging the use of transit by
locating a project with high density near transit. A project with a residential/commercial
center designed around a bus station is referred to as a transit-oriented development
(TOD).
Integrate Affordable and Below Market Rate Housing: This strategy provides
greater opportunities for lower income families to live closer to job centers since
income effects probability that a commute will take transit or walk to work.
Increase Transit Service Frequency/Speed: This strategy focuses on improving transit
service convenience and travel time competitiveness with driving. Given existing land
use density in Los Gatos, this strategy may be limited to traditional commuter transit
where trips can be pooled at the start and end locations, or it may require new forms of
demand-responsive transit service. Note that implementation of this strategy would
require regional or local agency implementation, substantial changes to current transit
TITLE: Traffic Impact Policy
Attachment 3 - VMT Reduction Strategies
PAGE: 3 of 3
POLICY NUMBER:
practices, and would not likely be applicable for individual development projects.
Implement Area or Cordon Pricing: This strategy focuses on implementing a cordon
(i.e., boundary) pricing scheme, where a cordon is set around a specific area to charge
a toll to enter the area by vehicle. The cordon location is usually the boundary of an
area with limited points of access. The cordon toll may be constant, applied during
peak periods, or be variable, with
higher prices during congestion peak periods. The toll can also be based on a fixed
schedule or be dynamic, responding to real-time congestion levels. Note that
implementation of this strategy requires alternative modes of travel that are available
and reliable, such as high-quality transit infrastructure.
TITLE: Traffic Impact Policy
Attachment 4 - Definitions
PAGE:
1 of 2
POLICY NUMBER:
DEFINITIONS:
Land use entitlements shall mean entitlement changes in use requiring discretionary approval
by Los Gatos, which include General Plan amendments, specific plans (and related
amendments), zoning changes, use permits, planned developments, and tentative subdivision
maps.
Land Use Projects or Development shall mean residential or nonresidential improvements on a
site.
Existing development shall mean any already existing habitable residential or nonresidential
building or projects which rebuild or remodel the existing development without increasing the
trips generated. No fee shall be charged for development already existing.
Expansion of use, to determine traffic increases, shall include any increase in the number of
living units, gross floor area in a nonresidential development and/or any intensification of use
which increases trips generated.
Transportation improvements shall mean those improvements to the transportation facilities
and related actions necessary to implement the transportation element of the Town's general
plan and any applicable specific plan.
Site shall mean a plot of ground consisting of one (1) or more lots or parcels on which a
common improvement is proposed or exists.
Trip generation rate shall mean the number of vehicle trips over a weekday twenty-four-hour
period generated by a particular type of land use and shall be expressed in terms of the number
of acres or square feet of land for each land use category. The Town Engineer may exercise
reasonable discretion to establish recommended trip generation rates for land use categories
consisting of groupings of land uses having similar use and functional characteristics. When the
trip generation rate is multiplied by the amount of land, the number of trips, both incoming and
outgoing, shall be estimated.
Average Daily Trips shall mean the total number of trips, both in-bound and out-bound, within
a 24-hour weekday period, generated by a particular use or development.
Pass-By Trip: Trips generated by the proposed Project that would be attracted from traffic
passing the proposed project site on an adjacent street that contains direct access to the
Project.
Peak Hour Trips shall mean vehicle trips, both in-bound and out-bound, occurring during a 60-
minute period either during the A.M. Peak (7 A.M. to 9 A.M.) or the P.M. Peak (4 P.M. to 6
P.M.), generated by a particular use or Project.
TITLE: Traffic Impact Policy
Attachment 4 - Definitions
PAGE:
2 of 2
POLICY NUMBER:
Specialty Retail. Specialty Retail uses are defined as walk-in and impulse businesses such as
juice bars, yogurt shops, coffee shops, donut shops, and similar uses which do not generally
serve meals and have limited or no seating. Specialty Retail uses are defined under this policy
for purposes of establishing trip generation data and this definition does not provide any land
use or zoning guidance.
Use shall mean the purpose for which a site or structure is arranged, designed, intended,
constructed, erected, moved, altered or enlarged or for which either a site or a structure is or
may be occupied or maintained.
Vehicle Trip End shall mean an incoming or outgoing trip going to or coming from anywhere
within the Town or outside the Town.
CEQA shall mean the California Environmental Quality Act. These terms are reserved for
definitions per the CEQA Guidelines: significance criteria, significant impact, and mitigation
measures.
Local Transportation Analysis shall mean analysis to assess potential mobility deficiencies
caused by new developments on the local roadway performance, following the Town’s
transportation policies. These terms are reserved for Local Transportation Analysis: threshold
or performance standard, deficiency, and mitigation improvement.
VMT is defined as vehicle miles traveled.